Sandblasting gun with boron carbide nozzle and tip (35*20*6mm) made of polyurethane (PU).
This gun can be used with an L35mm D20mm Sandblasting Nozzle, which is included.
The inner diameter of the air interface is 13mm.
The outer diameter of the sand interface is 23mm.
Boron carbide is used as the nozzle material.
Description of the Produc.
This is a powerful tool for removing tar, rust, old paint, and a variety of other substances. Designed for high-volume, high-efficiency sandblasting, liquid or air cleaning of components and surfaces. Rubber hose, pick-up tool, hex key wrench, and additional air jets and nozzles are all included.
Suitable for use with glass, aluminum, and other material.
It can also be used to clean structural components, mechanical components, finished products, and other items, among other things.
The PU Sandblasting Gun with a 35*20*6mm boron carbide Nozzle/Tip is available for free shipping.
Nozzle/Tip made of boron carbide.
Dimensions: 35mm (length) x 20mm (outside diameter) x 6 mm ( Inside diameter.
boron carbide is the material used.
Density: greater than 2.48 grams per cubic centimeter.
Microhardness>=3500kgf/mm2.
Flexural strength greater than 400 MP.
The melting point of aluminum is 2450 degrees Celsius.
Each material has a specific shelf life.
Stee. Shot between 2000 and 2500 h. Amount of quartz sand: 1000-1500 h. Corundum: 500-1000 corundu.
Low density, high hardness and strength corrosion, and low thermal conductivity are some of the characteristics of the material.
Included in the package.
(1) Sandblasting gun (1) Boron carbide (1) Sandblasting gu. Nozzl.
When I connected the piece of junk and turned on the air, the fitting blew out because it was not even screwed in and only a small amount of silicone was holding it in place. It also did not come with the fitting for your blast media, which was extremely disappointing.
