A great tool for cutting and drilling. It’s also good for grinding, sanding and polishing.
Spindle Lock to Make Collet Changes a Piece of Cak.
This is a list of the Collets: 1mm, 3mm, 3/32 in, and 1/8 i.
RPM: 1600.
Here are all the tools you need to cut, grind, polish, sharpen, drill, and polish with precision. The high speed rotary tool can move at up to 16000 RPM, which is good for working with a wide range of materials.
The year I bought this was 2012, and it’s now 2017.
A few years ago, I bought this tool to help me with small projects that required drilling through plastic and tin for small projects. It worked well for me. The only thing I did with it was cut and sand two 1cm holes through an altoids tin. It did the job well. I think it’ll only go through tin. As time went on, I used one of the many tools that came with it to clean off some of the rust from my bike. It was at that point that I ran into a problem. In the middle of that meeting, it turned off by itself. When I was 16, I didn’t know what was wrong. I thought the adapter might have broken or something. I didn’t throw it away. I kept it in my closet until 2017. So, I needed to use it again. I was sure it would work again. When I opened the adapter, I found that the wire that goes to the switch had been broken. Re-soldering it worked, so I did that again, and it worked. My bike will soon be free of rust. 1 star off because of the inconvenience.
