The Dynorbital Supreme non-vacuum sander is equipped with a low-profile, premium urethane weight-mated sanding pad.
Supreme models spin at 12,000 RPM, and the composite rotor is stronger and has better lubrication properties, allowing the blades to last for a longer time.
The composite base has an integrated rubber over-mold that provides a non-slip feel while also acting as an insulator against the cold.
The Air Random Orbital Sander has a pad size of 6 in, a vinyl or hook pad face type, an orbit diameter of 3/8 in, and is vacuum/non-vacuum compatible. The pad size is 6 in, the pad face type is vinyl or hook, and the orbit diameter is 3/8 in. HP – Air Tools is a trademark of HP, Inc. 0.28 horsepower, free speed of 12,000 revolutions per minute, variable speed no. Body Style – Air Tools & Equipmen. Industrial Duty, Palm, Lever Throttle, Industrial Dut. Spindle size 5/16 In.-24, 4.5 cfm average CFM at 15 second run time, 18 cfm CFM at full load, 4.5 cfm average CFM at 15 second run time. Required pressure is 90 psi, air inlet is 1/4 inch NPT, minimum hose size is 1/4 inch, overall length is 7 inches, and the exhaust type is rear exhaust.
I really like this DA. It is something I use on a daily basis for body work.
