The length of the tool setter is 60cm, and the thickness of the tool setter is 2mm. This is an improved version of the tool setter.
Wiring diagram for a 3-axis CNC control board: the red wire connects to A5, and the black wire connects to GND.
The knife is held in place by the black clip, and the small metal plate is placed on top of the carved object.
The working surface can be precisely positioned, which makes it particularly well suited for PCB engraving.
The automatic tool setting command (within 50mm height) probe command has been changed to: G90G21G38.2Z-50F100,G92Z1.6,G0Z2. The automatic tool setting command (within 50mm height) probe command has been changed to.
Specificatio.
CNC Z axis milling machine touch plate probe is the name of the product.
60cm is the length of the cable.
2 millimeters in thicknes.
1 pc knife setter is included in the price.
Instructions.
1. Connect the control board’s tool setting interface to your computer (slightly different).
2: The clamp is clamped to the knife, and the metal plate is cushioned against the table surface. 3.
Install the G90G21G38.2Z-50F100 tool setting commands on the software, or enter the commands directly into the software (different software interfaces are different, the commands are the same).
Fourth, when the tool reaches the metal plate of the tool setter, it comes to a stop and automatically returns to its original position.
5. Remove the tool setting device, indicating that the tool setting has been completed and that the table corresponds to the zero position of the Z axis.
