Multi-functional small cutting and polishing, strong power, CW and CCW functions, accurate flexible shafts, multi-functional table grinding are some of the applications for this product.
The material of the belt pulley is extremely fine and fine, and the use of fine teeth improves the stability of the transmission while simultaneously reducing noise levels. The speed reduction ratio of the belt pulley has been increased from the original 2 times reduction to a 3 times reduction, an improvement over the previous value.
Flexible Shaft, Maximum Cutting Thickness: 40mm (1.6in), 40mm (1.6in) maximum cutting thicknes. Chuck Range: 1.0 – 3.2mm / 0 – 0.1in, Chuck Range: 1.5 – 10mm / 0.1 – 0.4in, Angle Adjustment: 0-90, Rated Speed: 1000RPM, Chuck Range: 1.5 – 10mm / 0.1 – 0.4in, Chuck Range: 1.5 – 10mm / 0.1 – 0.4in, Chuck Range: 1.5 – 10mm / 0.1 – 0.4in, Chuck Range: 1.5 .
The table saw is constructed with a 6mm thick platform that is durable and does not deform, ensuring flatness and high-quality cutting performance. It is equipped with a graduated miter gauge and an acrylic protective fence on the top of the cutting desk.
A set of tools is available for use, which is sufficient to meet the installation and use requirements. Angle cutting, which allows you to cut out any angle between 0 and 90 degrees at will, ensures accurate and efficient operation.
There is only one minor issue and one major issue.
Minor: The “soft shaft” part of the buffing attachment is missing.
MAJOR: I’m putting together something to plug in and use. It requires 220 volts. The same as most large appliances that are 20 times its size. There is no mention of the numbers 220 or 120 anywhere. Nothing!.
Powered by electricit. That’s all it says on the tin.
There are numerous converters for converting down, but none have been discovered for converting up from 120 to 220. Prepared to send it back to you.
BOGUS!
