For nonferrous, like aluminum, a whole nuther ballgame….a high speed cold saw is infinitely better than any bandsaw for solids and hollow material. 02-12-2007, 07:47 AM #20 I beg to differ with Mr. Thomas, that although I bought the Ellis with thirty other machines, the saw was relatively new, and it came from a Portland, Oregon High School. Most of the stuff I sold immediately, but didn’t sell the Ellis because it seemed like a handy saw.
ellis band saw reviews Related Question:
What should never be cut on a vertical band saw?
Never cut materials that might be hardened, such as tool steel, files, hardened guideways, stainless steel etc. Any material than cannot be cut with a standard hand file should never be cut in a band saw.
How do I choose a band saw?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
What is the difference between a table saw and a band saw?
Instead of the solid, circular plate of steel with carbide teeth on a table saw, the blade of the band saw is exactly that—a narrow, flexible band of steel with teeth formed along one edge. The band saw blade is stretched and driven between two or three wheels.
How thick can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How do you break in Ellis saw blade?
To break-in your new blade, run it at the recommended speed but at only 1/3rd of normal pressure for ten minutes. Then gradually increase the pressure back to normal using the hydraulic cylinder.
How tight should a metal bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
What is the number 1 safety rule of the band saw?
Safety Rules Safety glasses are required. Never clear small pieces while blade is moving. Never adjust saw or setup while saw is running. Never cross arms.
Which is the best hobby bandsaw?
Our top choice of band saw, the JET JWBS-14DXPRO (view at Tool Nut), is powerful, versatile, and durable enough even for a professional, but is also well suited to the workshop of an avid DIY woodworker or hobbyist.
What is the smallest band saw?
The Proxxon Micro Saw is by far the smallest, lightest, most easily portable and stowable saw in this bunch. It has only 5-7⁄8″ of throat depth and about 3-3⁄8″ of cutting depth.
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What size band saw do I need for woodworking?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What is the advantage of a band saw?
One of the major advantages of using a band saw is the reduction in wastage. Band saws usually have a smaller kerf than other tools, which results in reducing wastage. Other tools have wider blades, whereas band saws feature narrow blades.
Is a band saw more versatile than a table saw?
If you’re looking for versatility, go for a bandsaw. If you’re looking for clean, straight, accurate cuts, go for a table saw.