6 Re: Band saw advice sought: Ellis vs. Jet i like ellis, we replaced ellis with bigger ellis a few years back and even the oldest ones work ok. 19 Re: Band saw advice sought: Ellis vs. Jet my jet saw is powered by a belt driven motor that goes to an oil filled gearbox. 20 Re: Band saw advice sought: Ellis vs. Jet I have not used that particular Jet model but I do have the JET 1018w which I love.
I’m looking for a horizontal band saw, something like the photo below.
Get on the newsgroup and scope out the modifications for those saws. Friend fried his motor by walking away from the saw while it was cutting and it jammed in the cut. A cheap little saw may prove to be just a cheap little saw no matter how much you spit and polish it up.
Jpg” alt=”Ellis” width=”170″ height=”70″ />
Ellis Portable Mitre Band Saws
Ellis band saws are available in eight different models using blades from 1/2” to 1 1/4”. Our most popular band saws are Model 1600 and Model 1800. If you are looking for a stationary band saw the 1800 band saw is a good option. Gif” width=”204″ height=”197″ />
All Ellis band saws are manufactured from heavy steel, welded and machined for accuracy and durability.
ellis vs jet bandsaw Related Question:
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What should I look for in a bandsaw?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
How thick can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
Which is the best hobby bandsaw?
Our top choice of band saw, the JET JWBS-14DXPRO (view at Tool Nut), is powerful, versatile, and durable enough even for a professional, but is also well suited to the workshop of an avid DIY woodworker or hobbyist.
Are Scheppach bandsaws any good?
5.0 out of 5 starsThis is not a toy, it is a fully working bandsaw. While it is a small machine it is good enough for serious hobbyist’s and professional’s especially where work space is at a premium or where only small work is done.
Which bandsaws are made in UK?
Saws UK stock bandsaw machines made by the world’s leading saw manufacturers, including DoAll, ISTECH, Pedrazzoli, Startrite, TMC, Macc and Carif, as well as our own cost-effective Comet and high performance Alligator ranges.
How do you break in Ellis saw blade?
To break-in your new blade, run it at the recommended speed but at only 1/3rd of normal pressure for ten minutes. Then gradually increase the pressure back to normal using the hydraulic cylinder.
How tight should a metal bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
What is the smallest band saw?
The Proxxon Micro Saw is by far the smallest, lightest, most easily portable and stowable saw in this bunch. It has only 5-7⁄8″ of throat depth and about 3-3⁄8″ of cutting depth.
What does resaw mean on a bandsaw?
A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Are band saws useful?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
Can you use a bandsaw to cut wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.