Use the European frameless 32 mm system to build cabinets quickly and accurately.
for setting shelf pin holes and cup hinges (35mm).
A portable line boring system lets you do what has always been done in the shop, but now you can do it in the field.
System: For use with Festool’s OF 1010 router and guide rail system, the LR 32 System has a 42in, 55in, and 95in rail to hold it in place (sold separately.
Two clamps and two wrenches are also included. The guide plate and the centering mandrel are also included. The two 5mm shelf pin bits are also included.
There is a Manufacturer.
When you use the LR 32 Hole Drilling System from Festool, you can build cabinets with the European frameless 32 mm system with precision and speed. This portable line boring system is great for installing cup hinges (35mm) or setting shelf pin holes (based on 32mm spacing) in casework. It lets you do what has been a shop-only job, only possible with big, stationary machines. It can be used with the Festool OF 1010 router and guide rail system, and it comes with a 42in, 55in, and 95in rail that you can buy separately. This way, you can do any job, no matter how big or how small. All of these things are included: A guide plate, a mandrel to center the mandrel and two clamps. There are two edge stops, two linear stops, two clamps, and an operating wrench (one for through holes and one for stopped pin holes).
It is typical of Festool and top notch, so it must be good. In addition, this is typical of Festool. When you look at the cost of the parts that make up the system, it’s a little overpriced. However, it is very good at doing what it was made to do – make holes that are the same size and spaced the same way every time. My jaw dropped when I saw that the numbers on the alignment bars were already starting to fade away. Once you use it a few times. They aren’t etched into the spacing rods. They are printed on (maybe with a decal?. A few online videos have helped a lot with how to use it quickly and accurately, and how to use it when the cabinet isn’t 32mm-based.
