In this set, you get a Freeman 3-in-1 Flooring Nailer and Stapler (PFL618BR), as well as a 4-in-1 Mini Flooring Nailer and Stapler (PFBC940.
Wood Flooring Nailer and Stapper: This 3-in-1 tool is great for installing 1/2″ to 3/4″ solid tongue and groove wood flooring.
Strong construction; Anodized aluminum cylinder, magazine, and drive blade; One piece drive blade made of hardened steel. Assembled with an ergonomic handle. The base plates should not be scratched. Long-reach fiberglass mallet with padded grips comes with it.
Mini Flooring Nailer and Stapper: Use the 45 degree base attachment to install 1/4″ to 1/2″ solid or engineered flooring. Use the regular nose cover for trim and finish work.
One of the 4-in-1 Mini Flooring Nailer and Stapper. A tool-free way to change the depth. Drive blade made of hardened steel with an anodized aluminum tube and magazine. Oil-free. An “ergonomically designed” person. The handle has a good grip. Exhaust that can be turned 360 degrees. An air filter or dust ca.
The Freeman P2PFFK Professional Pneumatic Flooring Nailer Kit (2 piece) is great for construction contractors on the job site and for people who want to do some DIY work at home. There are two tools in this kit: a 3-in-1 15.5-Gauge and 16-Gauge 2″ Flooring Nailer and Stapler (PFL618C), and a 4-in-1 18-Gauge 1-5/8″ Mini Flooring Nailer and Stapler (PFL618C) (PFBC940). Besides nails, the 3-in-1 Flooring Nailer / Stapler also fires 15.5 gauge 1/2″ crown staples. It is used to install solid tongue and groove hardwood flooring from 1/2″ to 3/4″ thick, and it fires 16 gauge T-cleats and L-cleats. It has a one-piece drive blade that is made of hardened steel, and the body is made of lightweight aluminum die cast. This air-powered nailer and stapler has two interchangeable no-mar base plates that keep it stable and make sure it does a good job. Brad nails and narrow crown staples can be fired by the 4-in-1 Mini Flooring Nailer / Stapler. Its base is at a 45-degree angle, which makes it ideal for installing 1/4″ to 1/2″ solid or engineered flooring. Remove the flooring foot from this tool, and it can also be used as a brad nailer and stapler for trim and finish work. Among the tools in the Professional Pneumatic Flooring Nailer Kit is a long-reach fiberglass mallet with a padded grip.
Took the 18 gauge staple/nail gun and tried to use it. It only fired the staple about half the way through. Checked the pressure on my compressor. It was almost at 100psi, which wasn’t the problem, so I checked the gun and looked at the instructions on how to change the pressure, but nothing worked. Large flooring nailer: Then, it worked great for a while, but then it started making a leaky hissing sound from the rubber hammer piece, and it wasn’t my pressure hose or connection. It was coming from inside the nailer gun. I’m going to send everything back. Junk!
