3018-PRO, 30-PROVer, 30-PROVer Mach3, and 30-PROVer Mach3 are all 3018-series CNC machines that can be used with most of them. Just make sure that your spindle is 42mm (1.65′′) in diameter and has two 4mm (0.16″) screw holes on each side of the spindle.
You can see through this dust shoe because it is made of high-quality clear ABS. The transparent design helps you keep an eye on your operations. Equipped with a nylon brush that is 40mm long. This helps the vacuum pick up more dust and act as a dust sweeper with a high rate of dust removal. Keep your machine and work area clean as you cut, drill, and carve.
Two-Piece Magnetic Design: It’s durable, light, and flexible, and it’s easy to use and clean. It’s easy to put together and put up. To finish the installation, all you have to do is follow these three steps.
The split design makes it a lot easier to change the parts. When you need to change your bits, you only need to pop off the bottom cover with no tools, and you don’t have to do any other complicated things.
The planting brush is much tidy and firmer than other glued ones. You could just replace the whole bottom cover when the brush is worn. Remove and add a new brush quickly.
This was easy to assemble and install, but the fact of the matter is that the bristles are too long and get caught in the tool. When doing any sort of deeper cuts, the bristles get caught in the tool and have messed up multiple projects. The image I attached was only a 0.1 inch depth, and the bristles wrapped around the tool and melted to the wood of the project. I tried adjusting how much the tool sticks of the collet, but have not found a happy medium yet.
