Genmitsu’s PROVerXL 4030 controllers are the only ones that can use this off-line module.
This controller is easy to use because it has a 2.4″ touchscreen display.
It’s possible to take charge of your PROVerXL manually with a controller. It’s easier to move your machine by hand and switch your spindle on and off while you’re moving it.
Your G CODE projects will be easy to get to and move around if you put them on an SD card. Make sure the offline module is plugged in. Then, you can transfer data to the module by plugging in a Micro USB cord.
It’s possible to control the CNC router without having to connect to a computer with the Genmitsu offline control module. In just a few seconds you can move all of you project files onto the SD card that comes with the camera. You don’t even need an extra computer to do this.
I hate this. After my first run, I broke and had to stop everything. My fault, but since then I’ve been able to get the spindle to work. A lot of the time, I can’t get the spindle to jog or spin. I’ve used Easel and the SD card to change my cut plans many times. Because I have a Mac, you should know that Candle doesn’t work with Macs. Thanks for telling me about that. However, since I have the offline controller, that won’t be a problem. Nothing has worked for more than 16 hours. In the afternoon, I moved the spindle to the first cutting position, but the spindle didn’t move. It was stuck. It didn’t work this morning, even though I unplugged everything and tried a new file. Only the spindle worked. Yesterday, I bought a new laptop in the hope that I could get my CNC machine to work again. With all our hearts, let’s hope
