There is a universal dust cover that fits almost all angle grinders that have a 4 inch to 5 inch cutting wheel on them. It is also simple to set up. A 4/4. 5/5 angle grinder from a different brand will fit in this tool box. With this dust shroud, up to 99 percent of airborne dust can be caught. It helps protect your health and keep the working area clean. Accessories. Spanner: This spanner can help you tighten or loosen angle grinder parts more quickly. Washing the Clamp. They can only be used if the diameter of your grinder’s head is smaller than our item’s diameter. How to. One by one, connect the grinder’s head to the shroud body. Then, lock the shroud to the angle grinder. Step 3: Connect the rubber hose to the vacuum adapter. Step 4: Connect the vacuum cleaner to the vacuum adapter.
I can’t find David B’s review from 4/16/21. The hose connection port on the shroud has a diameter of 1-1/2 inches, not 1-1/4 inches like the other one did. My Ridgid Shop vacuum hose has an OD of 1-3/4 inches. I bought a PlumbQuik (no longer Fernco) 1-1/2″x1-1/4″ flexible PVC coupler at HD for $7.22 plus tax. It works well for me. I can adjust the clamps on both ends. Because the flexible PVC coupler is made of PVC, it has a diameter of about 1/4 “The bigger the text. I’ve used the shroud with my Makita 4-1/2-inch drill to protect it from dust “a power tool that has a blade on i. It looks great. It allows most of the dust from the grinder to be caught. The hose and filter on the Ridgid Shop Vac had to be cleaned from time to time. Everyone who grinds with an angle grinder should use a dust shroud because it stops a lot of dust from flying all over the place. After I used the GLEX shroud, I added a star.
