Sharpening all saw chains with this too.
fits: All stone sizes for standard chain pitches and depth gauges will fit in this tool.
A chain saw sharpener that runs on 12 volts and has a speed of 24,000 rpm is made of cast aluminum, molded polycarbonate, and zinc-plated steel. These stones can be used to sharpen standard chain pitches. They come with one each of the following sizes: 5/32in, 3/16in and 7/32in.
Use the description: Use the markings on the swivel guide to set and hold the correct sharpening angle. Users can set the height and length of files and teeth with built-in tools.
An RPM grinder with 24, 000 revolutions per minute has a Kevlar(R) reinforced drive belt, high-speed micro ball bearings, and a polycarbonate case that can handle heat. When you use adjustable dials and thumb nuts, you can set the angle at which you sharpen and the depth at which you grind. To use the sharpener’s 8-foot power cord, you can attach it to any 12V battery with alligator clip ends. This way, you can sharpen chains at the job site. The sharpener comes with two grinding wheels that are 7/32″ and 1/4″ long, as well as a set of instructions. People who use this product could be exposed to chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm. It’s called www. P65Warnings, and you can find out more there.
Love this. You can keep this one in your shop so you can use it if you need to get very close to sharpening your chains. I’ve used it to crosscut (35 degrees) and rip (10 degrees) chains with this tool before. It does take some work to get the tool set up for the first link, but then it’s great for making sure the cutters are always the same size.
One thing I want: why can’t I use a regular plug to charge. For this, I have an electric plug, but I’d rather have a 12v battery in my shop. I like that it can be used in the field from a battery from a car or truck. It would be great if it could do both things.
