[Easy to understand and use. For beginners, an LCD visual window and an operating button are provided. In the offline control mode, the machine can be controlled to complete all types of CNC engravings.
[More detailed instructions will be provided.
The detailed description of the functions is also suitable for those with skilled hands who wish to customize the shortcut keys as they see fit.
[Upload the files in a two-way fashion.
It is simple to transfer files via the CNC machine’s USB port using the CNC machine’s USB cable, or to access files stored on an SD card using a card reader.
[It’s smaller and more convenient to carry around..
The CNC router can be set up anywhere you want to start carving, such as in your garage or workshop, and it is very portable.
Control your computer as you see fit, without regard for the limitations of your computer.
[It has been specifically designed for use with a CNC machine. In addition, this offline module is fully compatible with the Mostics CNC Router 3018-Pro. The offline controller is also suitable for use with other CNC machines of a similar design.
SPECIFICATION.
USB port is used for connection (USB-CH340.
Software includes the GRBL controller and the Universal G-code Sender.
Voltage range: 12-36 volt.
Atmel 328P is used as the master chip (arduino nano.
A4988 is the driver for a stepper motor.
Input device: MOSFET (recommended voltage is 1236V, current should be between 10A and 15A).
PWM speed of the spindle: Suppor.
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A of the stepper motor’s maximum current and additional heat. (Any stepper motor 42 or 57 will do..
Support for laser engraving.
Power Interface: 5.5-2.5mm DC interface with a 5.5-2.5mm DC interfac.
The following functions are supported: X, Y, and Z axis movement.
Activate the spindle or laser by turning it on or off.
Package Contents.
1 x Offline Controller Module (included in the price).
1 x FC 8P cable (female connector.
1 x SD Memory Car.
This controller is incompatible with the Sainsmart 3018 GRBL controller (see below). In contrast to the controller, which has a pinout of 10 pins, this offline controller has 8 pin ports when used with the provided ribbon cable.
