It is both efficient and powerful. Motor with 0.47 horsepowe.
Noise at a Low Leve.
Speed Regulator with Easy Acces.
Grip that is both compact and ergonomi.
1-Year parts and labor warranty Style:Straight Description of the produc.
Detailed description of the product Air Die Grinder, free speed 22,000 RPM, horsepower 0.47 hp, collet 1/4 in, exhaust rear, variable spee. Yes. Grinder Type Straight, CFM @ Full Load 23.1, Average CFM @ 15 Second Run Time 5.5, CFM @ Full Load 23.1, CFM @ 15 Second Run Time 5.5, CFM @ Full Load 23.1, CFM @ Full Load 23.1, CFM @ Full Load 23.1, CFM @ Full Load 23.1, CFM @ Full Load 23.1, CFM @ Full Load 23.1, CFM @ Full Lo. Throttle Lever, Aluminum Handle with Rubber Grip, Minimum Hose Size 3/8 in, Overall Length 6 5/16 in, Required Pressure 90 psi, Air Inlet 1/4 in, Ball Bearing Type Ball, Throttle Lever, Aluminum Handle with Rubber Gri. Characteristic. Internal air regulator, low noise level, swivel air inlet, 1/4 in. and 6mm collet sizes included, General Dut. The Manufacturer’s Statemen. The CP9111Q-B Straight Die Grinder is a powerful straight die grinder that is quiet and has an insulated handle grip. This is a strong statement. Motor with a maximum speed of 22000 RPM and 47 horsepower. Additionally, a speed regulator with easy access, a rear exhaust, and a lock off throttle are included. 6.7-inch length, 1.5-pound weight, and an average air consumption of 4.0 cubic feet per minute. Air inlet thread is 1/4-inch; minimum hose size is 3/8 inch; collet size is 1/4; average air consumption is 4.0 cubic feet per minute; length is 6.7-inch; weight is 1.5-pound, and the noise level is 80 decibels. It is possible to accept the rear exhaust over the hose assembly.
The Manufacturer’s Statemen.
The CP9111Q-B Straight Die Grinder is a powerful straight die grinder that is quiet and has an insulated handle grip. This is a strong statement. Motor with a maximum speed of 22000 RPM and 47 horsepower. Additionally, a speed regulator with easy access, a rear exhaust, and a lock off throttle are included. 6.7-inch length, 1.5-pound weight, and an average air consumption of 4.0 cubic feet per minute. Air inlet thread is 1/4-inch; minimum hose size is 3/8 inch; collet size is 1/4; average air consumption is 4.0 cubic feet per minute; length is 6.7-inch; weight is 1.5-pound, and the noise level is 80 decibels. It is possible to accept the rear exhaust over the hose assembly.
Very well done. There’s a lot of power. Then they make a model that is similar to this one, but with a longer reach and less power. I’m relieved that I didn’t get that one. This is the best model to follow. I have a standard length straight grinder, but there have been times when I’ve needed the extra length to complete the job. It’s a worthwhile investment in the long run.
