To get things done quickly, click here. There is no need to wait long for this elecric air compressor pump to fill the 6.8L tank with air to 300BAR. There is a speed of 2800RPM, or 4500PSI, and the work flow is 50L/min.
This is what a high-quality compressor has. Quick filling, pure copper motor, and a quick filling pum. 3 Oil and water separatio. four ways to cool: water and ai. 5 Easy to us. 6 Stability in performanc. In this case, safety and reliability are important.
It has an air pump system that cools things down.
This PCP pump needs a lot of cooling water, and it’s best if it’s in a vat of water to get better cooling.
As you can see, the application is very wide.
If you need to fight fires, use this high-pressure air compressor pump. You can also use it to detect leaks and find soft gas. It can also be used to aerate oxygen cylinders, test air tightness, and fill tires for cars.
It comes with a “after-sale warranty..
Regarding our Airgun compressor, we very much appreciate your thanks and trust. A 24-hour response will be given if you don’t know how to use it or have a question.
. This pump from MOMAA is a high pressure compressor. Our factory was founded in 2014, and we specialize in making high-pressure air compressor pumps and other parts for them. We believe that the quality of our products is the most important thing. To get in touch with us at any time if you have any ideas for our electric air pump, please do so. .
30MPA Electric PCP High Pressure Air Compressor Pump 4500PSI 2800 RPM 4500PS.
Please pay attention.
– 1. Batteries for the temperature sensor need to be put in.
2.Water must be added to the machine to run the water pump.
At the start, make sure the Oil level is close to the red point.
Pressure relief valve: – 4. The pump starts with no pressure; loosen it. If the machine shut down half way through, screw before you rest.
Work must be done at a temperature that is less than 158°F.
6. Make sure your patch board can handle more than 16A of electricity.
7.Don’t touch the head of the machine.
8.Don’t leave the machine running while it’s inflating.
➽Specification.
Steel is the material.
In this case, the voltage is 110V at 60Hz.
People use AC Power, which is electricity.
34.5*20*33cm is the size.
– Motor power:1.8 K.
2 stages in the compression proces.
Reciprocal pump theory.
Cooling: Water Cooling + Air Coolin.
This is how it should be set up.
The inflation speed is 2800 R/Min.
There’s a lot of noise: about 78d.
In this case, the weight is 17.5KGS/18.5KG.
– After-sale service. Video technical support is provided by the company.
300BAR / 30MPA / 4500PSI is the working pressure.
– the package is 47X27X42 cm.
It says: Package Lists.
1 x 30Mpa Electric Compressor Air Pump with High Pressur.
One of the hoses is called Female.
-1 : A Water Pump.
-1 Parts that wear ou.
-2 Water Pipes.
It does what it says it does and fills my.05L scuba tank to almost 4000psi in about 5-7 minutes. A water-only pump can get very hot. It’s because water is cooling down parts of the machine that compresses that the circulation pump needs to be in an ice bath. This means that the cooler should have at least a gallon of water and at least a gallon-sized container of ice inside. Make sure to put a gallon-sized ziplock bag about 3/4 full of water in the freezer. Then, add that to your cooler full of water. Keeps the water and ice cold for longer, so you can fill more air tanks.
