My daughter and son-in-law’s yard had some trees that were way overdue for a trim, and a peach tree that needed to come down, so I packed up the EGO 56V Chainsaw and my flannel lumberjack shirt and hit the road. I unpacked the EGO 56V chainsaw, and threw the battery on the charger. Straighten out the chain, hold the bar upright, and drape the chain over it so it sits in the bar’s groove. Although the EGO 56V Chainsaw doesn’t require you to mess around mixing gas and oil to power it, it does need oil to lubricate the bar and chain, just like any other chainsaw.
All EGO out door power equipment comes with a 5-year limited warranty and 3-year limited warranty on EGO POWER+ System battery packs and chargers. EGO includes a 14-inch steel Oregon bar and low-kickback chain. Release the throttle trigger on your Echo chainsaw to stop the chain rotation.
ego chainsaw what kind of oil Related Question:
What kind of oil does a ego chainsaw use?
OVERVIEW. The EGO POWER+ 32 Fl Oz Premium Bar and chain lubricant is recommended for use with EGO POWER+ Chain Saws to extend bar and chain life for superior performance. The premium oil-free formula outperforms traditional bar and chain oils and is 100% bio-based and biodegradable.
What oil should I use for my chainsaw?
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can I use 10w30 in my chainsaw?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use vegetable oil in my electric chainsaw?
Kitchen oils are not necessarily designed for use on a chainsaw in the long term which could cause maintenance issues, so we’d recommend the use of a vege oil designed for your chain.
Is chainsaw oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can I use regular oil for chainsaw bar?
Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.
Can you use 5w30 in a chainsaw?
Yes. almost any oil better than nothing.. even other oils ate used if U cut edible things or plastic. if possible mix it with a part of sticky chain oil so it dont geet centrifugated so easy.. but also in some aplications the non sticky oil is used to centrifugate dust.
What viscosity is chainsaw oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
Can I use any 2 stroke oil in my chainsaw?
Can I use any 2 stroke oil in my chainsaw? No, you can’t use any 2-stroke oil in your chainsaw. Some 2-stroke oils are built for motor oils, and this might damage your chainsaw. Also, 2-stroke oils for an air-cooled engine are different from a water-cooled engine.
What kind of oil is bar and chain oil?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
Does a chainsaw need engine oil?
To run properly, all chainsaws need two types of oil for different jobs. The first is engine oil. The chainsaw shown here has a two-stroke engine, so it needs two-stroke engine oil mixed with the fuel to help cool and lubricate the moving parts inside the motor.
Can engine oil be used as chain lube?
Can I use motor oil as a chain lube? You can use motor oil. However, it’s not recommended as this oil is too thick and won’t penetrate the inner components.