Drilling, crushing, chipping, excavating, and squaring are all possible on a demolition or concrete jobsite.
Drilling, Hammering, and Drilling/Hammering are the three functions.
750 RPM with no load; 4000 RPM upon impact; Voltage: 110-120V/60 Hz; Input Power: 900W (1.2 HP). Concrete drill bit capacity is 1 inch (28mm), steel drill bit capacity is 16mm, and wood drill bit capacity is 40mm.
One 3-Function Rotary Hammer; one side handle; one SDS Plus Point Chisel (245mm-long); one SDS Plus Flat Chisel (245mm-long); three SDS Plus 145mm-long chisels are included in the package. There are eight drills in total: eight 8mm drills, one 10mm drill, one 12mm drill, one grease bottle, one plastic carry case, one user’s manual, and a pair of carbon brushes.
I am quite pleased with the product at this price. This is, in my opinion, a considerably superior tool to the one available from Harbor Freight Tools.
If you store your tools in the case, it will last for a long time.
The housing and overall appearance of the tool are pleasing.
This small guy smashed up the basement concrete (4″-5″) for the shower drain with no problem, despite the fact that the huge breaker was needed to get started. I can’t wait to get my hands on some ceramic tile.
Keep in mind that it probably would have shattered the concrete right away, but you don’t want to beat up on the tool too much. That’s a little too demanding for a tool of this size.
