If there is too much fuel mixed with the air, the engine “Runs rich” and either will not run, runs with a lot of smoke, runs poorly or, at the very least, wastes fuel. There is an adjustable plate across the tube called the throttle plate, which controls how much air can flow through the tube. One of these screws controls how much fuel flows into the venturi at full throttle.
how a chainsaw carburetor works Related Question:
How does a chainsaw carburetor work?
The carb is operating “normally” at full throttle. In this case, the throttle plate is parallel to the length of the tube, allowing maximum air to flow through the carb. The air flow creates a nice vacuum in the venturi, and this vacuum draws in a metered amount of fuel through the jet.
Why is my chainsaw not getting gas?
If your chain saw isn’t getting gas, the trouble most likely lies in one of those three core components: the fuel tank, the spark plug or the carburetor, or one of the minor parts adjacent to the three.
What connects to the carburetor?
The carburetor uses fuel from the fuel tank to supply gasoline to the engine. There is typically a hose or metal tube for this, called the fuel supply line, that connects to the carburetor.
What are the main parts of a carburetor?
Components of carburetors usually include a storage chamber for liquid fuel, a choke, an idling (or slow-running) jet, a main jet, a venturi-shaped air-flow restriction, and an accelerator pump. The quantity of fuel in the storage chamber is controlled by a valve actuated by a float.
Why does my chainsaw bog down when I give it gas?
If your chainsaw is bogging down when you give it throttle, this is often a sign of improper gas-to-oil ratio. If there is too much gasoline in relation to the amount of oil used, this is known as a “rich mixture” and can cause the chainsaw to run poorly.
Why does my chainsaw run then stop?
A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
Why does my chainsaw only runs on choke?
When your chainsaw only runs if the choke is on the problem, in most cases, is a result of fuel supply problems or a faulty carburetor. To fix the problem you should check and clean the fuel system and carburator.
What happens when carburetor fails?
A failing carburetor directly affects your vehicle’s fuel efficiency, so you’ll find yourself spending your hard-earned cash at the gas pump more often. The improper fuel/air mixture can also cause avoidable engine damage.
Why is my carburetor not getting gas?
No fuel at your carburetor can be caused by many things. It could be a simple issue like a fuel filter plugged so tight that no fuel can pass through. Another logical cause could be the fuel pump. If the fuel pump is electric, the 12-volt power may be shorted.
What does a spark arrestor do on a chainsaw?
The spark arrestor on your chainsaw prevents dangerous hot sparks from igniting fires while you’re working. If the arrestor is clogged or dirty, however, it will also prevent exhaust from leaving the motor, which can prevent it from running.
What part of the carburetor controls fuel entering the carburetor?
The first valve, known as the choke, regulates air flow into the carburetor to mix with the fuel and is only used when the engine is cold. The second valve opens and closes when you depress the gas pedal and regulates how much of the combination exits the carb and goes into the engine.
Should there be gas in the carburetor?
Pouring gasoline into the carburetor is dangerous and should not be done unless there is no other option for starting your car. If your engine backfires during the operation, the gasoline you pour could ignite while it is in your hands.
Where does fuel go after carburetor?
The mixture of air and fuel flows down into the cylinders. Fuel (orange) is supplied from a mini-fuel tank called the float-feed chamber. As the fuel level falls, a float in the chamber falls and opens a valve at the top. When the valve opens, more fuel flows in to replenish the chamber from the main gas tank.