Saw chain is not designed to cut, it is designed to remove material, one chip at a time. Depending on the length of the chain for a certain size bar, there will either be an equal number of alternating left hand and right hand cutters, or the chain will end with 2 back to back same-side cutters. Following up from what I said at the beginning, it wasn’t until I took the time to really learn about chain and how and why it works, that I was really able to service, maintain, and sharpen chains.
A good chainsaw can be helpful in a wide variety of activities, from landscaping trees and foliage to cutting life-saving firebreaks in heavily wooded areas to ice sculpting during the winter! It is extremely important to practice extreme caution when handling a chainsaw for any type of activity, as while in operation, the blade of the saw is strong enough to cut through human skin, muscle, and bone. How exactly a chainsaw works is through the use of the aforementioned parts being powered in tandem to create enough friction to slice through a tougher material with ease. Now that you are informed of what a chainsaw actually is, how each individual part works, and what, if any, maintenance may be required of a chainsaw owner; it may be easier to determine what chainsaw would be the best for you to purchase.
It’s often best to use the undercutting chainsaw technique to reduce the chances of the chainsaw getting pinched or stuck during a cut. A word of caution when using the cross cutting chainsaw method: the chainsaw will try to push back at you. By using these proper chainsaw cutting techniques, you should be able to take care of most common tree cutting jobs.
The clue is in the name! A chainsaw has two main parts: a saw blade built into a chain, wrapped around a long metal guide bar, and a small, one-cylinder gasoline engine. Chainsaw helmets with visors offer some protection; so too do chainsaw uniforms. Wayne’s Chainsaw Museum: A short video tour of Wayne Sutton’s chainsaw museum in the United States, will hundreds of saws dating from about the 1930s.
Do it the right way and prevent chainsaw injuries and chainsaw cuts. Cut with the top or bottom of the bar and chain, but avoid the kickback zone Kickback zone on a chainsaw. Chainsaw Cuts: Cutting the Tree Trunk Photo 4: Start cutting downward in the trunk.
how a chainsaw cuts Related Question:
What part of the chainsaw chain actually cuts?
The cutter is the part of the saw chain that does the cutting. The saw chain has left- and right-hand cutters so that the saw chain will cut evenly through the wood.
Why does chainsaw cut at an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Do you cut up or down with a chainsaw?
Never cut above shoulder height. Work on the uphill side of trees so they’ll roll away from you instead of over you. Use your chain brake! Whenever you aren’t cutting, the brake should be in the locked, or “On,” position.
Can a chainsaw cut a person?
Flesh is no match for a chainsaw, it could probably cut through it pretty much forever without wearing out. Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
What is the difference between chainsaw chains?
Chainsaw chains come in three main varieties. They come in full chisel, semi chisel and low profile chains, with each being used for different tasks. The chisel refers to how the teeth are cast on the chain itself – which then determines how the chain cuts through the wood.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Why does my chainsaw jump when cutting?
Improper Chain Tension You can extend the life of your chain, bar and chain saw motor by maintaining the proper amount of tension on the chain. Too much slack in your chain can cause the saw blades to jump the bar. This is commonly referred to as throwing the chain.
Can a chainsaw cut metal?
To answer your question: “Can a chainsaw cut through metal?” The answer is yes, a chainsaw can cut through metal. Chainsaws are multi-purpose machines that can be used in a variety of situations. However, you should not randomly pick up any old chainsaw off the shelf at your local hardware store.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Why does my chainsaw burn the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why does my chainsaw blade get dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.