Chainsaw oiler consists of an oil pump, oil lines, and oil holes. With the oiler system cleaned from all the debris and gunk, reassemble everything and start your Chainsaw. For electric chainsaw models, you should examine the oiler after each use and make sure it gets replenished when empty.
The next iteration of chainsaw oiler was still manual, and because it involved an onboard thumb plunger next to the throttle, it eliminated the need for a “Chainsaw caddy.” This advancement in chainsaw oiling technology allowed the operator to manually pump oil onto the bar while cutting. If the chain spits small amounts of oil onto the wood, you’ll know that your chainsaw oiler is functioning properly. As always, if you’ve got any other pro-tips on how to keep your chainsaw oiler functioning properly, feel free to leave them in the comments section below!
The oil system on a Stihl chainsaw lubricates the engine and the bar and chain. The bar and chain oil on a Stihl chainsaw originates from the oil tank on the same side as the gas tank. Stihl chainsaws use an automatic oil pump, which means that whenever the engine reaches a high enough speed to engage the chain, the pump is also activated, taking the hassle out of manually trying to engage the oil pump and control the flow of oil to the bar.
Specially engineered chainsaw bar oil goes into the oil reservoir. It’s simple to check whether or not the oiler works properly: Hold the chainsaw over a flat surface, such as a tree stump, engage the throttle and look for oil drops coming from the spinning chain. Turn up the Stihl chainsaw oiler adjustment counterclockwise to increase the oil.
how a chainsaw oil pump works Related Question:
How does the automatic oiler work on a chainsaw?
The throttle simultaneously engages the motor and the oil pump. As you throttle up, a worm drive engages the pump to send oil through a port that releases onto the bar. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.
How do I know if my chainsaw oil pump is bad?
Generally speaking, the signs of a chainsaw oiler problem are easily spotted. If the chainsaw seems like it’s getting too hot or producing smoke, that is a sign that there is an oil deficiency in the chain. This is not good for the life of your chainsaw. If you spot this problem, it is time to troubleshoot the issue.
Is it normal for a chainsaw to leak bar oil?
In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.
How often do oil pumps fail?
You’ll want to check your owner’s manual or the manufacturer’s information online to see how long your particular oil pump should last. Keep in mind that it’s either time or the number of miles, whichever comes first. If you use 12,000 miles per year as a guide, a typical oil pump should last between 5 and 5.84 years.
How do I know if my oil pump is working?
Listen to your engine while your vehicle is running to see if you hear any high-pitched whines or clinking and clattering noises. Even if you hear the noises slightly, check the oil pressure on your pump to make sure it’s working properly.
How do you clean a chainsaw oiler?
Wipe oil and sawdust from the bar, including from the groove in the bar’s rim, by using a rag. Clean the oil feed hole on the bar by poking 16-gauge wire through it. Poke the wire into the oil outlet port on the body of the saw to remove sawdust and dirt that may block it.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Do chainsaws have oil pumps?
The oil pump is part of the chainsaw lubrication system, which consists of: Piston pump. Tank with vent, to balance the inside and outside pressure, and a filter that traps impurities. Oil outlet hole on the guide bar.
Is chainsaw oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Do all electric chainsaws leak oil?
Even after you have removed oil from the reservoir, the electric chain saw might continue to leak oil if the pump is dirty. Excessive oil on the oil pump gaskets can cause leakage. Wipe the gaskets clean and check them for wear. If the gaskets are ruptured, replace them.
Why is my Stihl chainsaw leaking chain oil?
This condition is deemed to be normal for any chainsaw with a similar bar & chain lubricating system. If the unit continues to seep oil after a few days, the problem may be the vacuum relief valve located in the side of the engine housing between the oil output hole and the bar stud(s).
What causes oil pump failure?
If the oil level is too low, the oil pump will have to deal with extra friction due to lack of lubrication. This will cause mechanical problems and warping of various parts in the pump, which will eventually cause the pump to fail.
Is it worth replacing oil pump?
Conclusion. You can change oil pump if it starts showing wearing signs. It should last somewhere between 60,000 and 70,000 miles in a properly maintained and regularly serviced vehicle.
Is replacing an oil pump expensive?
The average cost for oil pump replacement is between $1,151 and $1,357. Labor costs are estimated between $761 and $960 while parts are priced between $390 and $397. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
Can you change an oil pump yourself?
Unfortunately, signs are pointing to an oil pump replacement — and the sooner, the better. Fortunately, parts are affordable, it’s a straightforward task if you have some time, and the DIY method can save you hundreds of dollars.