One of the most common questions about a circular saw is how deep it can cut. What follows are the most common size of circular saw blades and their normal depth of cut at a 90-degree angle as well as a 45-degree angle. Obviously, a 90-degree cut provides the maximum cut capacity while the 45-degree bevel will limit the thickness you cut through.
A circular saw is a powerful cutting saw, which operates in rotary motion with a spinning blade mounted inside. First, do not set the blade too deep as the circular saw will work more roughly and robustly. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
This article will teach you the fundamentals of cutting depth and how deep can a circular saw cut. You must adjust the depth of the cut on a circular saw to match the thickness of the board you’re attempting to cut before cutting. Knowing how deep a circular saw can cut is essential.
The larger the diameter of the circular saw blade, the deeper the saw is able to cut. How deep the circular saw can cut is determined by the particular model of circular saw and the diameter of it’s blade. To further prevent blade kickback, support the board or panel near the cut, and never attempt to remove the saw from the work or pull the saw backward while the blade is in motion.
how deep can a 235mm circular saw cut Related Question:
How deep of a cut can you make with a circular saw?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
How deep will a 165mm circular saw cut?
Bore size: 30mm. Blade diameter: 165mm. Maximum cutting depth: 0°: 57mm, 45° Bevel: 40mm.
How deep will a 10 circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
How deep can a 8 inch circular saw cut?
Circular saw sizing is based on the blade diameter. Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches. Compact saws can use anywhere from 3 3/8-inch blades up to 6 1/2-inch blades.
How deep can a 6.5 inch circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
How deep can a 7 blade cut?
A 7” circular saw, for instance, can only cut to 2-¼ inches deep, meaning you’ll need to sledgehammer the rest of the concrete away; a 14” wet-cutting blade attached to a concrete-cutting saw, on the other hand, gets you to 4-5/8 inches of clean cut.
How deep can a 6 1 2 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Will a 4.5 inch circular saw cut a 2X4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
Can a 5.5 inch circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
How thick can a 10-inch saw cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
How deep can a 10-inch blade cut?
The vast majority of table saws use a 10-inch circular blade that can cut up to 3.5 inches deep. There are some other table saws that use a 12-inch blade, which can cut up to 4 inches deep.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
