The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”.
This saw uses a 6 ½” blade, and this one uses a 7 ¼”. The 6.5 will cut up to 2 1/16″, while the 7 ¼” cuts up to 2 ⅜”. “Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Whether you buy HART or another brand of circular saw, the choice between 6.5 and 7 saw comes down to this.
Beginners often get confused when it comes to 6.5 vs 7.25 circular saw. It’s not recommended to use either a smaller or larger blade on a circular saw than what the manufacturer recommends to use. A circular saw with a 7.25-inch blade would cut 4×4 materials without any issue.
Cuts While a 7.25 circular saw can cut through materials up to 4 inches thick, a 6.5 inches circular saw can cut through materials up to 2.5 inches. A 7.25 inches circular saw is heavier than a 6.5 inches circular saw. If you deal with wood occasionally, rather than regularly, a 6.5 circular saw will be the best saw for you.
One of the most common questions about a circular saw is how deep it can cut. What follows are the most common size of circular saw blades and their normal depth of cut at a 90-degree angle as well as a 45-degree angle. Obviously, a 90-degree cut provides the maximum cut capacity while the 45-degree bevel will limit the thickness you cut through.
how deep can a 6.5 circular saw cut Related Question:
How thick can a 6 1 2 circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
How deep can a 7.5 circular saw cut?
Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
Can a 6 1 2 circular saw cut a 4×4?
Like miter saws that measure less than 12 inches, a circular saw’s 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you’ll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
How deep of a cut can you make with a circular saw?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
Can you use a 7 blade on a 6.5 circular saw?
NO, a 7″ blade will not fit inside the blade guard. Also, it’s rough on these little saws cutting concrete or tile unless you reduce the blade size.
How deep will a 10 inch circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
How deep can a 4 1/2 inch circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees. The saw also features a depth of cut adjustment lever and a 1-1/4″ vacuum adapter.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What size circular saw will cut a 4X4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
Can you use a 6 blade in 6.5 circular saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can you use a 7 inch blade on a 10 inch saw?
Yes, you can use a 7” blade on a 10” blade table saw. There will be a diminution in the depth of the cut, but it is possible to use a smaller blade. There will be less noise and less waste (sawdust) using the smaller blade, too.
