In common, a standard circular saw, which mounts a 7 1/4-inch blade, can provide a depth of 2 1/2 inch maximum.
A circular saw is a powerful cutting saw, which operates in rotary motion with a spinning blade mounted inside. First, do not set the blade too deep as the circular saw will work more roughly and robustly. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
One initial concern I had with this saw had to do with the reduced depth of cut that I would get with a 6.5-inch diameter blade versus a 7.25-inch diameter blade. I decided to calculate a table of depth of cut values versus the angle of the saw blade. I used a bit of trigonometry to derive a formula for the depth of cut.
how deep will a 165mm circular saw cut Related Question:
How deep can a 6 1 2 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
How thick can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
How deep can a 4 1 2 circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees.
Can a 5.5 circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
How deep can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
How deep can a 10 inch circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
How deep can a 8 inch circular saw cut?
Circular saw sizing is based on the blade diameter. Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches. Compact saws can use anywhere from 3 3/8-inch blades up to 6 1/2-inch blades.
How deep should a circular saw cut?
Don’t clamp both sides of a cut. For efficiency and safety, set the blade depth no more than 1/4-inch below the thickness of the board.
Does a homeowner need a circular saw?
Most new homeowners will want a power saw of some kind, and a circular saw is a good starting point— can handle far more cuts than you’d think.
How thick a piece of wood can a circular saw cut?
Generally, the blade of a circular saw can cut wood of thickness up to 2.5 inches. Depending on the thickness of the wood being cut, you need to change your blade’s depth. Since your wood is thick, ensure you are using Carbon-tipped blades. Use a crosscut blade for smoother cuts and rip blades for grain cuts.
Can a circular saw cut 100mm?
The MAKITA HS0600 240v Circular saw – 270mm blade has the following features: 2000 Watt. No load speed: 4300rpm. Depth of cut: 100mm.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
How deep can a 6.5 circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
How deep can a mini circular saw cut?
How deep can a 7.25-inch compact circular saw cut? A compact circular saw designed for a 7.25-inch blade can cut to a maximum depth of 2.5 inches.
