The electrically heated handle can be switched on if needed, for greater operating reliability even in very cold conditions. Both handles remain free from snow and ice and the user has a firm grip on the chain saw. STIHL chain saws with an electrically heated handle are indicated by the letter “W” in the model name.
Starting a chainsaw when the engine is cold requires using the choke. Otherwise, the steps on how to start your Stihl chainsaw remain the same for both hot and cold starting. Flooding of the engine is another major cause of Stihl Chainsaw not starting.
Went to pieces,after 3-4 years,put another handle on all was good. The harder you run the saw,the hotter the handles get. Yes I mainly only buy saws with heated handles , keep your hands warm and that helps keeping the rest of you warm.
how do heated chainsaw handles work Related Question:
Why does my chainsaw not start when hot?
When your chainsaw quits after it gets hot, you either have a problem with gas flow being restricted into the engine or with the spark. This is a common occurrence on older-model chainsaws. By replacing your spark plugs and keeping your gas lines clear you can reduce the chances of this problem recurring.
What causes a chainsaw to vapor lock?
Vapor lock occurs when the fuel (usually gasoline) within the fuel delivery system overheats and vaporizes too rapidly. The resulting excess gas bubbles accumulate to the point of actually blocking normal fuel delivery.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Do chainsaws have a break in period?
Although Stihl chains are pre-stretched, running a new chainsaw through a short break-in period helps smooth any small imperfections and allows the chain to settle into the rivets properly, according to Stihl’s publication “Sharp Advice for Chainsaw Owners.”
How long should you run a chainsaw?
Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.
Is an electric chainsaw any good?
Electric chainsaws are great for all your residential cutting, pruning, trimming, shaping, or simply for clearing branches. They’re safer and much healthier for the environment than a gas-powered chainsaw. These chainsaws are easier to operate and handle due to their lightweight.
What can I do with an old chainsaw?
Gas and oil can be disposed of at a household hazardous waste collection site for free. Remove non-metal parts and place in the trash. Metal parts can be recycled as scrap metal.
Why does my Stihl chainsaw bog down?
Stihl carburetors have three adjustment screws. One controls the fuel mixture when the engine is idling, one controls it when the engine is operating at low speed and one is for high-speed fuel control. When the saw bogs down during cutting, it’s usually the high-speed screw you need to adjust.
Why does my chainsaw bog down when I give it gas?
If your chainsaw is bogging down when you give it throttle, this is often a sign of improper gas-to-oil ratio. If there is too much gasoline in relation to the amount of oil used, this is known as a “rich mixture” and can cause the chainsaw to run poorly.
What happens when a chainsaw overheats?
The air filter will eventually get to a point where it will become so clogged that it won’t let fresh air pass through. At this point, the engine will stop working because it cannot run without air. This will make the chainsaw overheat due to the lack of cooling fresh air.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
What causes chainsaw kickback?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
How long should you warm up a chainsaw?
Chainsaw warm-up is briefly starting the machine and letting the engine/motor run for a few seconds. Whether you have one from Husqvarna, STIHL, Craftsman, or Echo, every woodworker would want to have a great sawing day with their tool.
How do you break in a chainsaw after rebuild?
in chainsaws that recommend 8 oz to 1 ga. On a fresh rebuild, I use 40-1 and add about 1/2 teaspoon of extra oil to full tank. I use the saw, with extra oil, but avoid high rpm out of cut and extended idling, until two or three tanks have been used. After that, I use regular mix,40-1 and do final carb setting.
How long do Husqvarna chainsaws last?
It ultimately comes down to the factors listed above (especially maintenance). That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.