You can buy very inexpensive angle grinder tool, but for frequent use or for demanding jobs like cutting stucco or cement, I’d recommend spending a little more for a grinder with a more powerful motor. Outfitted with a grinding wheel, an angle grinder is a great tool for restoring edges on rough-and-tumble tools like hoes, shovels and ice scrapers or for the initial grinding of axes, hatchets and lawn mower blades. Finally, with the grinder off, rest the grinding wheel against the blade and adjust the angle of the grinder to match the blade’s bevel.
We got our Pro team together to give you some tips on how to use an angle grinder from basics to some advanced techniques and shortcuts. Additional Pro Tips on How to Use an Angle GrinderBefore applying the grinder to the work surface, allow the tool to reach full speed. If you’ve got any tips or tricks on how to use an angle grinder, feel free to leave your input in the comments section below!
The secret to successfully using an angle grinder is choosing the right type of cutting disc. Consider how much wood you want to remove and how fast to define the correct cutting disc for your needs. The angle grinder size is determined by the size of the disc, not the length of the tool itself.
If you need to use the grinder for more than an hour, it may be better to invest in a corded angle grinder. The rapidly rotating disc on an angle grinder doesn’t just smooth, polish, and grind away metal, it can also be used for cutting through metal. Equip the angle grinder with an abrasive grinding disc and ensure that the blade of the tool is properly secured in a vise so that you can focus on controlling and steadying the movement of the grinder.
Angle grinder uses: choosing the best angle grinder for the job. How to restore cutting edges and sharpen blades with an angle grinder. If you’ve got a lot of mortar to remove and you’re finding that a hammer and chisel just won’t cut it, get your angle grinder out instead. This is another of the top angle grinder uses.
how do i use an angle grinder Related Question:
How do you use an angle grinder for the first time?
Angle the grinder disc with the cutting edge of the blade or tool you’re working on. Start the grinder and let the disc spin at full speed. Move the disc steadily across the blade, applying only the lightest pressure. Move the grinder from the handle end of the blade and up to the tip of the tool.
How do you grind with an angle grinder?
For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back towards your body. Use a smooth back and forth motion to guide the flap disc over the material.
Do you push or pull an angle grinder?
Allow the wheel to pull itself through the workpiece rather than trying to force it through. This minimizes friction and force, and helps extend the life of the cutting grains. Don’t push too hard. Pressure and heat are the biggest enemies of abrasive cutting products.
Can you use a cut off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
What direction should you feed the cutting disc into the workpiece?
The direction of the cutting motion is important. Always feed the cutting disc into the work so that it cuts in an upward direction.
Are angle grinders safe?
Angle grinders can cut through stone, concrete, metal and other hard materials, so they have no trouble cutting through human flesh and bones. Contact with the wheel while in operation can have serious consequences, with deep cuts and even amputations.
Do angle grinders spin clockwise?
The simple answer is yes. Angle grinder rotates in opposite direction as thread pitch. It is general rule for all nut clamped tooling.
Can you cut concrete slab with an angle grinder?
Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
What is the difference between a grinder and an angle grinder?
In a nutshell, a die grinder is typically smaller and has several different attachments that can help you cut, sand, polish, and various other things. The angle grinder is a larger and often heavier tool that uses a rotating wheel to grind, sand, or cut larger materials.
Can you use an angle grinder on wood?
Using your angle grinder on wood can be just as, if not more dangerous than metal. Some of the new angle grinder attachments are specifically designed for cutting wood and have many sharpened steel teeth, just like a chainsaw.
How do you cut pipes with a grinder?
When using an angle grinder or reciprocating saw, start the tool before contacting the pipe, then slowly lower the cutting disc until it contacts the surface. Apply steady pressure until it severs the pipe. When using a hacksaw, slowly draw the blade back and forth, making sure that the cut is straight.
What PPE is used for grinding?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work. Ensure the floor around the work area is clean.
