When you’re planning on felling a tree, you can estimate where a tree will fall by using the “Ax handle trick.” This is how to fell a tree in the direction you want: hold an ax handle at arm’s length, close one eye, and back away from or move toward the tree until the top of the ax is even with the treetop and the bottom is even with the base. Wedges will keep the saw from getting pinched in the cut if the tree leans back. The instant the tree begins leaning, pull the saw free, set the chain brake and walk away along one of your escape routes, keeping an eye on the tree so you can react if it doesn’t fall the way you planned.
Here at HealthyHandyman, we’ve taken it upon ourselves to show you how to cut down a tree with a chainsaw – the right and safe way! Even with the best planning, your tree may get caught on another tree on its way down. If the tree is twenty inches wide, you would cut the open-faced notch five or six inches deep, and the back cut 12 or 13-inches deep, leaving a 2-inch hinge in place.
how do you chainsaw a tree down Related Question:
How do you cut down a tree without a pinching chainsaw?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
Which way will a tree fall in a storm?
A tree will most likely fall in the direction of the lean.
What side of the tree do you make the first cut?
Start Cutting Branches at the Trunk Work from the left side of the trunk (as you face toward the top of the tree). This allows the safest and most efficient use of the chain saw because you can rest the side or bottom of the saw on the trunk and slice off the branches with a pivoting motion.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
What equipment is needed to cut down a large tree?
Essential Equipment For Cutting Down Trees Big trees usually require a chainsaw whereas smaller trees may be able to be cut down with an ax. Of course, for the fastest results, a chainsaw is always the best choice.
What equipment is needed to cut down a tree?
A chainsaw is typically the first tool that most people think of when the topic of tree cutting is brought up. Using a chainsaw is the simplest and quickest way of cutting down a tree. Chainsaws are quite powerful and can cut through wood with relative ease.
What equipment is needed to cut trees?
Wedges – Combined with an ax and chainsaw, this will help make the whole process easier. Safety Equipment – Whether you use an ax or a chainsaw, you need to protect yourself while doing this type of work. Purchase a hard hat, work gloves, work boots, eye protection and ear protection.
Can you cut off the top of a tree without killing it?
If the tree dies, it will have to be removed. If it survives, it likely will need corrective pruning, although it will never recover its original, natural form. Since topping is not an approved professional practice and causes safety risks, homeowners may be liable for damage from the failure of a topped tree.
How much of a tree can you cut without killing it?
As a general rule, don’t prune off more than 15% of the foliage. If you must make space for other plants, it is a better idea to remove a tree completely than to risk over-pruning it.
How much wind is needed to uproot a tree?
– at 47 to 54 mph, there will be light structural damage. – at 55 to 63 mph, entire trees can be uprooted and considerable structural damage can occur. – above 64 mph, expect widespread structural damage.
Which trees are most likely to fall in a storm?
Trees Most Likely To Fall In Wind The tree species most likely to fall in wind tend to be willow white spruce, cedar, and white pine. These species also tend to live in wetter soils which can also contribute to a tree’s likelihood of falling.
When should trees be cut down?
If your tree has a less severe problem, one of the best times to remove trees is during the dormant season, between late winter and early spring. Here’s why. Dormant trees are leafless and lighter, so it’s much easier for a certified arborist to cut and handle the branches.
How do you cut a tree with a hand saw?
Trim branches and limbs that will make cutting the tree down easier, or could prove dangerous during your work. Use your handsaw and make a cut on one side of the branch, cutting about a third of the way through. Switch to the other side and continue cutting until the branch falls off.