One Drawer Down, Three To Go. If your band saw box has more than one drawer, go ahead and cut out the rest of them now. The next step is to create the cavities that make the drawers, drawers. Be sure to put the drawers into their respective places – especially with oddly-shaped drawers – to make sure you get the pulls level.
I used cut 1x4s and glued the pieces together to make the initial cube shape that I would cut down with my bandsaw for this project. Now you can start cutting away the excess, the nice part about a bandsaw box is that you have room to make mistakes because everything is going to get cleaned up when you sand it! Now you just want to cut the back of the box off as straight as you can.
Once you’ve achieved a nice smooth texture, finish your bandsaw box with your favorite topcoat, laquer or stain. Kyle’s bandsaw box was crying out for some small knobs to finish off the drawers. That’s one of the best parts about creating your own bandsaw box.
how do you make a bandsaw box Related Question:
What is a band saw box and how is it constructed?
Band saw boxes are boxes made out of wood using only a bandsaw for cutting them out. The wood may be a solid block, a laminated block or a log from the woodpile. Whereas most boxes have straight sides and square corners, band saw boxes have virtually no restrictions as to shape.
How deep should a bandsaw box be?
Step 1: Bandsaw Box Blank The depth can vary but I like mine to be about 4″ thick. In this example I’m using Baltic birch plywood as my core with an exotic wood on the faces. You’ll glue up all the pieces with wood glue on the faces of each piece. Use plenty of wood glue make sure the entire surface is covered.
Whats a band saw do?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.