The chain brake should be activated when you start the chainsaw. Release the front handle and allow gravity to bring the chainsaw down, rotating around the rear handle, towards the stump. Hold the chainsaw firmly by the front and rear handles.
how do you start husqvarna chainsaw Related Question:
Why is Husqvarna chainsaw not starting?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting.
Are Husqvarna chainsaws hard to start?
While most Husqvarna chainsaws start up even years after they’re first purchased, with minimal effort, a few may have difficulty even from the beginning.
What is the button on top of a Husqvarna chainsaw?
What is a decompression valve? A decompression valve releases some of the compression from the combustion chamber during the starting procedure, making the engine easier to turn over when pulling the recoil rope.
How do you start a Husqvarna Pole Saw?
Starting the Saw With the pole saw on the ground, hold the engine down with your left hand and pull the starter handle and cord slowly with your right hand until it starts to catch, then quickly jerk the cord to start the engine. Let go of the handle when the cord begins to retract.
How long does a spark plug last in a chainsaw?
A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.
What kind of spark plug does a Husqvarna chainsaw?
Champion Spark Plug (RCJ7Y). The spark plug ignites the fuel and air mixture in the engine’s cylinder to power the engine.
What kind of spark plug does a Husqvarna chainsaw use?
BPM7A NGK Spark Plug Fits Husqvarna 36, 40, 41, 42, 45, 50, 51, 55, 61, 66, 136, 137, 141, 142, 235 e, 236 e, 240 e, Chainsaws 503235108, 503235111. Fits most Husqvarna chainsaw models.
Do you start a chainsaw with the brake on or off?
The chain brake should be activated when you start the chainsaw. Many chainsaw models can be started in what is known as ‘half-throttle’ position. In this position, the chain can rotate – if the chain brake is not activated.
What does the choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.