Step 5: If you are using your saw for felling or crosscutting, boring the chainsaw bar into the trunk may be the best way to cut. Step 7: Pay attention to the nose of your chainsaw bar and how it is positioned. Step 9: Use narrow-nose bars, such as Oregon Double Guard bars, to ensure maximum kickback safety.
‘Chainsaw kickback’ is a phrase that is used when discussing operating chainsaws. To ensure absolute safety, it is extremely important to ensure you’re well versed in what it means and how to handle it. To fully prepare for chainsaw kickback you first need to understand what it is, how it happens and how to avoid it.
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback – the rapid upward motion ofh te guide bar that can occur when the saw chain, near the nose of the top area of the guide bar, contacts an object such as a log or branch, or the backwardm otion that can occur when the wood closes in and pinches hte saw chain in the cut. The most common and probably most violent kickback occurs when contact is made, either accidentally or intentionally, in this “Kickback zone.” In some cases the blade tip may move upward and back toward the operator who could suffer a very serious or fatal injury.
The reason it has this name is that the chainsaw tip is the most common part of the chainsaw that can cause a kickback. If you’re cutting with a chainsaw and the wood closes around the chain tightly, it can cause a chainsaw kickback to occur. Chainsaw kickback is the most common type of chainsaw injury that people encouter.
Below, we’ll explain chainsaw kickback as well as the kickback zone, causes of kickback, preventive measures, and how to avoid kickbacks in the first place altogether. Chainsaw chaps are preferable because they are chainsaw resistant and are also specially designed to protect the left side of your leg, which is another prime target for a kickback. There are many ways to avoid a potential chainsaw kickback.
how does a chainsaw kickback Related Question:
How often does chainsaw kickback happen?
Kickback can happen in the blink of an eye too. In fact, about 30,000 chainsaw-related injuries happen each year, with chainsaw kickback accidents being the most common hazard.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Where is the kickback zone of a chainsaw?
The term “kickback danger zone” refers to the top of the tip of the chainsaw bar. This area has a high kickback risk. You should never saw using this part of the chain saw bar, since doing so will significantly increase the chances that you will experience kickback.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
What causes a kickback?
The two main causes of injury from kickback is trauma from the wood striking the head, chest, or torso of the woodworker, or the wood moving so quickly that an operator doesn’t have time to take their hand off of it and it gets pulled across the saw blade.
What are metal bucking spikes on a chainsaw?
Bumper Spikes: This series of sharp metal spikes protruding from the saw near the base of the bar provide leverage for easier, more controlled sawing. Jab the spikes into the log, then pivot the bar downward to guide the chain through the cut.
Why is my chainsaw hard to pull and kicks back?
If your chainsaw is hard to pull, here are some common causes: The pully system is snagged or stuck. The starter assembly is stuck or sticky. The housing may be damaged.
How common are chainsaw accidents?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
What is the most common chainsaw injury?
More than 36 percent were injuries to the legs and knees. Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.
Why do chainsaws buck?
“Kickback” refers to the sudden, accidental movement of the bar of the chainsaw back in the direction of the operator while cutting. It is what every operator of a chainsaw should fear most. Kickback results from the tip of the chainsaw being allowed to come into contact awkwardly with an object.
How do you stop a chainsaw?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Can you cut sideways with a chainsaw?
While a properly working chain saw helps you cut hours off your work time when felling trees or cutting logs for firewood, it can also be a dangerous tool when things go wrong. When a chain saw cuts sideways, it’s a clear indication that things aren’t as they should be.
Can you cut dry wood with a chainsaw?
When it comes to actually cutting these wooden discs, your mind probably doesn’t immediately jump to a chainsaw as your tool of choice. But a chainsaw actually makes it easy to cut wood slices, especially if the raw material is a log, stump, or other large chunk of wood.