But how does a chainsaw oil pump work? The crankshaft drives the pump, which draws oil from the tank and pushes it onto the guide bar via the outlet hole. The movement of the chain then distributes the oil along the entire length of the guide bar.
The next iteration of chainsaw oiler was still manual, and because it involved an onboard thumb plunger next to the throttle, it eliminated the need for a “Chainsaw caddy.” This advancement in chainsaw oiling technology allowed the operator to manually pump oil onto the bar while cutting. If the chain spits small amounts of oil onto the wood, you’ll know that your chainsaw oiler is functioning properly. As always, if you’ve got any other pro-tips on how to keep your chainsaw oiler functioning properly, feel free to leave them in the comments section below!
Chainsaw oiler consists of an oil pump, oil lines, and oil holes. With the oiler system cleaned from all the debris and gunk, reassemble everything and start your Chainsaw. For electric chainsaw models, you should examine the oiler after each use and make sure it gets replenished when empty.
If your chainsaw is new or you have replaced your chain and guide bar, you will need to keep adjusting the oiler until you determine the right setting that will enable the oiler to produce just the right amount of lubrication. If the above fixes do not work or oiler problems keep recurring, this could indicate that your oiler may be damaged. To ensure that the oiler is functioning correctly, start the chainsaw and let it run for a few minutes then direct the tip of the chainsaw blade towards a piece of wood.
how does a chainsaw oiler work Related Question:
How does a chainsaw automatic oiler work?
The throttle simultaneously engages the motor and the oil pump. As you throttle up, a worm drive engages the pump to send oil through a port that releases onto the bar. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.
Is it normal for a chainsaw to leak bar oil?
In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.
How do I know if my chainsaw oil pump is bad?
Generally speaking, the signs of a chainsaw oiler problem are easily spotted. If the chainsaw seems like it’s getting too hot or producing smoke, that is a sign that there is an oil deficiency in the chain. This is not good for the life of your chainsaw. If you spot this problem, it is time to troubleshoot the issue.
How do you clean a chainsaw oiler?
Wipe oil and sawdust from the bar, including from the groove in the bar’s rim, by using a rag. Clean the oil feed hole on the bar by poking 16-gauge wire through it. Poke the wire into the oil outlet port on the body of the saw to remove sawdust and dirt that may block it.
How do you adjust a chainsaw oiler?
To increase the oil flow, turn the automatic oiler adjustment screw counterclockwise. To decrease oil flow, turn the automatic oiler adjustment screw clockwise. While always wearing heavy work gloves, grasp the chain and pull it towards the nose of the chainsaw to ensure that the chain moves freely.
How do you adjust the oiler on a Stihl ms271?
Slightly rotate it left or right to properly align the screwdriver with the screw. Once it clicks in, you are good to go. Remember that rotating it clockwise will increase the oil flow, and rotating it counterclockwise will decrease it.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Why is my Stihl chainsaw leaking bar oil?
What causes a chainsaw to leak oil? As the oil is pumped from the tank through to the guide bar, air begins to replace the space where the oil was previously stored. If there isn’t proper ventilation of the oil tank, a vacuum can occur and reduce the flow of oil to the guide bar.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
Do all electric chainsaws leak oil?
Even after you have removed oil from the reservoir, the electric chain saw might continue to leak oil if the pump is dirty. Excessive oil on the oil pump gaskets can cause leakage. Wipe the gaskets clean and check them for wear. If the gaskets are ruptured, replace them.
How much bar oil should a chainsaw use?
When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.
Why is my Husqvarna chainsaw leaking chain oil?
The oil must be of a viscosity that adheres to the chain without being too thick or too thin. If you’ve chosen the wrong oil for the machine, that may be the reason it’s leaking from the bottom. Husqvarna strenuously warns users to never use waste oil in a chain saw.
Can a oil pump get clogged?
How Do I Know If My Oil Pump Is Clogged? An oil filter that is clogged can be one of the causes of poor performance. There is a metallic noise that is audible. The oil pressure is low.
How long do oil pumps last?
You’ll want to check your owner’s manual or the manufacturer’s information online to see how long your particular oil pump should last. Keep in mind that it’s either time or the number of miles, whichever comes first. If you use 12,000 miles per year as a guide, a typical oil pump should last between 5 and 5.84 years.
Will a bad oil pump leak?
When you finally see it, you may not be aware of the leak’s source, which is why regular vehicle maintenance is essential. Allowing an oil pump O-ring leak to go unrepaired can lead to persistently low oil levels and seriously damage an engine.