An enclosed blade on the saw has a base with runners that fit inside the grooves of a track; the grooves of the track hold the saw as it is moved along the track to cut whatever material the track is set upon. Well-placed saw horses support the plywood, and your track saw makes ripping it into any width an easy task, easier even than on a table saw. Circular saws are less expensive than track saws – a good circular saw can run you between $60 and $150, while a track saw will be $500 or more, depending on the brand.
In this track saw buying guide, I will tell you everything you have to know about track saws, including what they are used for and what look for when buying one. You can use a track saw to cut large boards that cannot be loaded on to a table saw. Festool who is a leader in the plunge cut track saw market offers guide rails from 32-inches to 197-inches in length.
TrueTrac Saw System: Track Saw 101 – How Track Saws Work – TrueTrac – The Better Track Saw System Skip to content Asking what exactly makes a track saw worth purchasing is one of the most common questions we get, so here’s our best effort at showing you the real world benefits that a track saw brings. Our customers have found more uses for our TrueTrac Saw system than we ever imagined – from solid top counter tops, to cutting vinyl siding or corrugated metal roofing, to ripping rough sawn or reclaimed lumber for your projects – these are all projects possible with most track saws. Since the track saw rides on top of a track saw system, you can cut rough sawn or reclaimed lumber without worrying about the saw plate dipping under the guide if the guide “Bridges” over a low spot in the work piece.
A track saw does most of what a table saw does, but moving between job sites is a lot easier. The track saw makes the cleanest cut, compared to a circular saw and table saw. Whether the material was solid wood, plywood or MDF, the track saw cuts were just as smooth as the table saw cuts.
how does a track saw work Related Question:
How does a track saw stay in place?
While it cuts, a plunge-cut track saw rides along a stable track, which stays in place thanks to non-slip, non-marring pads on its underside.
Can any circular saw be used as a track saw?
A circular saw can be used for all the same functions as a track saw, but doesn’t necessarily do them quite as well. If you’re on a budget, you can turn your circular saw into a makeshift track saw with straight edge guide. You can make your own circular saw jig, or buy one instead.
Is it worth buying a track saw?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
Do you have to clamp down a track saw?
Track saws make long, precise cuts faster and better than table saws and circular saws. They are light and portable, don’t need clamps and set up quickly and accurately.
What’s the difference between a track saw and a circular saw?
A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none. A track saw has an enclosed blade to enhance dust extraction, whereas the circular saw lacks this feature.
Is track saw safer than table saw?
Track saws are much safer than table saws. Table saws are more powerful than track saws. Track saws allow you to cut large sheet goods that may be difficult to handle on a table saw. Table saws allow easy repeatability when making rip cuts.
How deep can a track saw cut?
Most track saws can cut just over 2 inches deep; however, some of the larger track saws can cut up to 2½ inches deep.
Can you joint with a track saw?
As a result, a track can replace a jointer to square and joint the edges of timber. However, it cannot completely replace the ability of a jointer to remove bows, cups, and bends. Because you can cut straight edges with a track saw, it is an excellent tool for jointing lumber edges.
Is a track saw a plunge saw?
A plunge saw, sometimes referred to as a track saw, is a type of hand held circular saw which slides on a rail during application. You can perform long and accurate cuts with a plunge saw. Unlike other saws, a plunge saw can be fed at the start of the material or be plunged directly into where you need to cut.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
Can a table saw cut plywood?
Tools for cutting plywood. A table saw equipped with a sharp wood blade makes proper cuts to the plywood.
Is there an alternative to Sawstop?
The most well-known Sawstop alternative was the Bosch REAXX table saw. This table saw was released in 2015 and featured a similar flesh-sensing technology to the Sawstop.
