The WIDE-BELT SANDER feed on sander off feed off sander on thickness dial The wide belt sander is used to machine stock flat and to specific thicknesses. Set stock on conveyor, let the machine pull the stock in. Walk around to back once stock is halfway into the machine and wait for it to fully exit the machine on the conveyor.
Drum Sander Pros:Drum Sander Cons:It takes longer to change the sandpaper. Wide belt sanders usually come with a platen, which is used to give your wooden stock the final finish before you apply a random orbit sander or stain the surface. If you need premium-quality sanding rolls for your drum sander or wide belt sander, our experienced abrasive technicians are here to help you realize the maximum return on your investment.
One of the most important steps in establishing an ideal production system is finding a wide belt sander that consistently delivers the high-quality finish you and your clients expect. We’ll be diving into four important things you need to know before putting money down on a new wide belt sander. If your wide belt sander needs to deliver multiple finish types, then it’s essential for the machine to be capable of swapping out to different abrasive belts quickly.
Belt sanders are the big, powerful gorillas of the sanding world. If you’re new to belt sanders or have been frustrated by yours, read on to find out how to keep that big ape under control. Sanders for $100 to $250 when looking for the best belt sander.
how does a wide belt sander work Related Question:
Is a wide belt sander better than a drum sander?
In short the wide belt wins in every way except cost, there’s really no competition. A drum sander is a nice tool that’ll get you buy for hobby work, or even as a small shop until you can afford a wide belt. But trying to compare a drum to a widebelt is not fair to the drum.
How much material can a wide belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
What is a platen on a wide belt sander?
Platens. Platen heads are the work horse of the segmented platen machine. They are mostly used for conventional sanding of raw wood or between coats on finish. Most parts run through a wide belt machine will have the grain running parallel to the feed. This is the type of head that would sand these parts.
When using a belt sander you should never?
1. Do Not use the belt & disc sander if you are too tired, hungry, sad, mad, or dehydrated. Never work while under the influence of drugs, alcohol, or any medication that creates drowsiness or impaired thinking.