Learn how to use your circular saw to make laser-accurate straight cuts! Here are four sure-fire ways to cut precise straight lines on boards and plywood! Breaking down sheets of plywood or MDF. Tips for Cutting Straight with a Circular Saw Position the speed square, DIY circular saw cutting guide, or Kreg Accu-Cut so it covers the side of the workpiece you want to keep. There are four ways to make straight cuts with a circular saw.
Using a guide to cut with your circular saw is a great way to ensure a straight cut and it’s quick to set up. Make a DIY guide to cut a straight line You can easily make your own cutting guide to use with your circular saw. Final Thoughts on Cutting a Straight Line with a Circular Saw Circular saws can certainly be tricky, especially when making straight cuts – so hopefully you’ll be more confident than ever on your next cut.
If you’re not an experienced user, your best bet to make straight cuts every time is to use a circular saw guide like the Kreg rip-cut guide. It’s great for making straight rip cuts, repeat cuts, and most important of all, you get to make straight cuts every time as you push the circular saw along the slide. Follow the above steps, and you’ll make straight cuts with your circular saw every time.
Despite its name, the portable circular saw cuts only straight lines. The blade in a circular saw rotates so that the teeth come from the lower side and cut up into the workpiece, which means that any splintering that occurs will be on the top of the piece. Adjust the depth of cut so that the saw will cut no more than a quarter inch beyond the thickness of the wood.
how to make circular saw cut straight Related Question:
Is it hard to cut straight with a circular saw?
In fact, it’s usually easier to cut long pieces of plywood with a circular saw and a straightedge than to wrestle unwieldy sheets through a table saw. A circular saw won’t cut as smoothly as a table saw, but with a couple of techniques, a little finesse and some practice, you can cut almost as accurately.
Why is my circular saw pulling to the right?
If the base plate is not parallel to the blade, the saw will also want to travel to the side. If your saw was dropped at some point the base plate could easily be out of alignment. Turning to the right would indicate that the base is farther from the blade at the front than it is at the back.
What saw makes straight cuts?
Think of a track saw like a train track for our circular saw. The saw rides on a guide rail or track as it cuts. This allows us to make long, straight, accurate cuts. The Accu-Cut is different from the Rip-Cut because it can be used to cut any width board or plywood.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
What can I use for straight edge?
If there are no markings, it is simply a straight edge. A ruler can be used for measuring and marking straight lines. A straight edge will not help you measure, but most are built more durably than rulers, making them a superior tool for marking straight lines. In most cases, rulers can function as a straight edge.
