Take me to the hotel – Baggage gone, oh well …. 10-25-2009, 11:36 PM #5 My bandsaw table is a little higher than elbow height. 10-26-2009, 2:43 AM #6 I like mine slightly under elbow height so I can see the work well but not have to bend my arms upward while working. The drill press table and head are height adjustable.
“I have a ryobi 9” bandsaw and i currently use it on my bench top, which at times is very awkward to use. I want to build a movable stand for it but not sure how high to make it.
Bottom of saw to saw table top is appx 14 1/2 “. Have your say… Forum Topics Woodworking Skill ShareYour woodworking skills are displayed for several lifetimes in each project. Show us your jigs, share your tips, strategies and, of c… 1908 Wood & LumberDifferent wood requires different woodworking strategies – from cutting to finishing.
Finding just the right work height for your bench and your power tools can make your time in the shop even more enjoyable. A recent post in WoodNet – The optimum height of a woodworker – got me hard at work copying and pasting smart ideas and methods from WoodNetters. “1) Three Tool Height Zones”The are at least three working height zones: Low for power.
Hi folks , I need some advice on the height a bandsaw table should be from the floor. As people are all different heights , I am guessing there is no legal minimum height , I have looked on the HSE website & others without success. I have asked at work about getting an adjustable stool for our bandsaw , as there are different shifts using it & people of varying heights.
Here are the standard heights for woodworking machines from “Humanscale 1/2/3″ 46 inch = bandsaw table 42 inch = lathe centers 39 inch = radial arm saw table 36 inch = circular saw table 36 inch = workbench 36 inch = sander table 36 inch = shaper table 33 inch = jointer 32 inch = circular saw table 24 inch = stool or chair for 36 inch work surface No mention of a thinkness planer. These standard heights were developed over time to match the Average american male who was 68.8 inches tall in 1973 when Humanscale was published. Suggestion for calculating your ideal equipment height” Ideal Height = Standard Height x your height / 68.8 This method is based on the assumption that our bodies are proportioned to our height – ie short people have shorter arms and legs, tall people have long ones.
how high should a bandsaw be Related Question:
What is the height of a radial arm saw?
Most of the RAS’s I’ve seen on display in stores seem to have a table height of around 42 inches.
What is throat depth on a bandsaw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
How far should the upper guides on a band saw be adjusted on a band saw?
What is this? Set the front of the blade guide about one-sixteenth of an inch from the deepest part of the blade gullets (the spaces between the teeth on the blade). The blade guides must ride behind the teeth on the bandsaw blade.
Can you put a 12 blade on a 10 radial arm saw?
No. A 10 inch table saw is just big enough to accept a 10 in blade. 12 inch blades are too big to fit a 10 inch table saw.
How deep can a 12 inch radial arm saw cut?
Depth of Cut 3” (12” Blade 90 Degree) Depth of Cut 2” (12” Blade 45 Degree) Maximum Crosscut 16” in 1” Material. Maximum Rip 26 3/8”
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What does a 14-inch bandsaw mean?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
Why is it important to adjust the height of the blade guard on the bandsaw?
Adjust blade guard height to about 3 mm or 1/8 inch to 6mm or 1/4 inch above the top of the material being cut. Wider gaps will place tension on the blade and increase the risk of breaking. Ensure the blade is tracking correctly and runs freely in and against the upper and lower guide rollers.
Why do bandsaws shake?
Band saw tires are another likely source of vibration. Tired tires, caked with pitch and dust or full of cracks and missing chunks, can not only contribute to blade and saw vibration but can also cause major blade tracking problems.
Can I put a 12-inch blade on my 10-inch table saw?
The Blade Runner Twelve-inch blades are harder to find, and at a higher price typically at woodworking supply retailers. Theoretically, a 10-inch blade will fit on a 12-inch table saw, but the arbor — or hole in the middle of the blade — is typically smaller.
Can you use a 10-inch blade on a 12 in miter saw?
You can put your 10-inch blades on your 12-inch saw (assuming the arbor holes are the same size), but you cannot put 12-inch blades on a 10-inch saw. The 12-inch saw gives you greater versatility – with the larger blade, it’s the hefty workhorse, and with the smaller blade, it’s a master of precision.
Can you put a 7 inch blade on a 10-inch miter saw?
Yes you can. Smaller blades can run faster since their mass is closer to the axis of rotation (I think), so they can be made thinner. But, the RPM of a smaller blade will be the same as that of a larger blade, and in fact the cutting edge will be moving slower. In other words: the blade isn’t in danger.
Are radial arm saws obsolete?
If they are used in any other way, no.” Ellis Walentine “In my mind, radial arm saws are not at all obsolete. Although sliding compound miter saws do an excellent job of finish-crosscutting boards up to 12” wide, nothing beats a radial arm saw for crosscutting wider stock and rough boards.
Do you push or pull a radial arm saw?
The basic cut for a Radial Arm Saw is to place your wood on the fence and then pull the saw forward to make the cross cut. The saw blade will push the wood down to the table and back to the fence, holding everything safely in place.