You have to do some research on the best sanding belts that suit your needs, but most of the sanding belts, when used appropriately, will last over a year. We have researched the various sanding belts in the market, the ones with top-rated reviews, and the ones that have been extremely reliable to pick the five best sanding belts for woodworking. The belts last long and in case you are looking for replacements, there are 10 belts that come in a single pack.
The longevity of your sanding belts depends on a bunch of factors. Good belts might be what looks like poor value, but poor belts are worthless. For instance a 1 X 32 belt sander will not allow the belt to be used for a long time no matter what belt you buy.
BTW, these were stored in the shop, a temperature controlled environment……. 12-15-2014, 07:28 PM #2. 12-15-2014, 07:33 PM #3. 12-15-2014, 07:42 PM #4. 12-15-2014, 08:04 PM #5. 12-15-2014, 08:14 PM #6 I have had lots of belts come apart as soon as I started the machine. Sandpaper for Woodworking, Metalworking, Boat, Wind, Rail, Autobody, Glass, Belts, Discs, Sheets, Rolls, Hook and Loop sanding Our company – KLINGSPOR Abrasives, Inc. So it is false economy, or perhaps a gamble, to buy lots of belts on sale knowing you will not need them within a year, and not knowing how old they are when you buy them. 12-15-2014, 11:13 PM #16 I have had the same problem with a batch of 3M sanding belts.
The easiest way to tell when it’s time to change the sandpaper is to run your finger lightly over the part of the paper you’ve been using, and do the same over a part that is still new – the part that is wrapped around a sanding block, for example. Hook-and-loop sanding discs work great for sanding jobs, and you can reuse them several times before they’re worn out. AVOID awkward hand positions where a sudden slip could cause a hand to move into the sanding belt or disc.
Some of the lower priced belts don’t track well – you do get what you pay for obviously! History has shown me that the 3M seem to perform the best. The best thing is to make a hanging rack for your belts with the rows far enough apart to not allow the belts to touch while hanging. Let the belts hang for a few days before trying to put them on the machine.
how long do belt sander belts last Related Question:
Do belt sander belts keep breaking?
A: Belt seams rarely fail, despite the friction and high-speed flexing that sanding belts endure. Heat, humidity, and age can contribute to belt seam failures, but they’re not the only causes.
How long does sandpaper on a belt sander last?
The sander’s rotating power can also impact how long the sandpaper will last. For example, using it on a 1095 blade can make your sandpaper last for over a month. Instead, if using it on an S110V, it can last only a few hours.
Do sanding belts have a shelf life?
Do Abrasives Have a Shelf Life? It depends on the abrasive. Vitrified bonded grinding wheels have an almost infinite shelf life, but the possibility of accidentally damaging a wheel in storage increases over time. Organic bonded grinding wheels and coated abrasive discs and belts do have a shelf life.
How can I make my sanding belt last longer?
Another way to extend the life of your belts is to prevent clogging and loading in the first place. This can be done with an abrasive belt grease stick that goes on the belt before use. These sticks have a lightweight grease that spreads a thin layer of lubricant over the surface of your sanding material.
Why do I keep breaking sanding belts?
A reason why your belt could have popped could be because of excessive loading of the material being sanded. While this is not the most common, we have occasionally seen that foreign particles in the machine or a wide variation in workpiece thickness can cause too much pressure and thus cause the belt to snap.
Can sanding belts be repaired?
You can also mend or make abrasive belts by this DIY method: Obtain some bias binding tape from a fabric store, or you can make your own. Then use CA adhesive to bind the bias binding tape to the cleaned edges of the sanding belt you want to make or repair. I have done this many times, and it works fine.
How long should you use a sander for?
But – random orbital sanders are designed to be used extremely slowly. Not quite a snail’s pace, but perhaps an ant’s. So, what’s the ideal speed? About ten to twelve seconds per linear foot.
Can sandpaper be reused?
Is sandpaper recyclable? Sandpaper is not recyclable. Most items made of multiple materials cannot be recycled. The adhesive component in compound items such as sandpaper makes it very difficult to decompose and reuse.
Why does my Porter Cable belt sander keep breaking belts?
There are pretty much two reasons they can be breaking so quickly: the belts are old stock (or have been stored in humid or hot locations) or the tension is too high. Or both.
Can you cut sanding belts?
You can cut sanding strips from sanding rolls or sanding belts. Cutting from sanding rolls is the more ideal solution.
What tape is used on sanding belts?
Apply the Scotch 8959 tape by using a small piece of swimming pool noodle or other firm foam/rubber like a squeegee pressing firmly and leaving overlap on both ends, make sure there are no air bubbles and the tape is perfectly flat covering both splice ends equally.
Why does my orbital sander keep stopping?
If the shaft becomes damaged and deformed due to heavy usage or rust build-up, it won’t be able to balance the rotor and the bearings. When this happens, your orbital sander will eventually stop spinning, so you’ll need to replace the shaft to get it working again.
Why does my sander leave swirl marks?
A random orbital sander can leave swirl marks due to poor quality sandpaper, improper technique, or an inability to clear the dust from the surface.
What are the biggest sanding mistakes to avoid with a sanding machine?
Avoid pushing down with too much pressure on the sander. However, doing this can cause issues like swirls, cut-through, uneven sanding and other problems, such as excess heat and loading.