Continuing cases of chainsaw injuries show that there is a real need to educate chainsaw operators on not only wearing chainsaw protection but also selecting the best chainsaw protective product for their situation, how to maintain chainsaw protective garments and other critical questions. Modern chainsaw pants are definitely more comfortable than chainsaw chaps. The difference between buying a good pair of work pants and chaps is not that much less than chainsaw pants.
If you use PPE every day, wash it at least once a week. Grease solvent can help make heavily soiled PPE fresh again. PPE can be cleaned in a washing machine on normal wash settings at temperatures up to 60°C spin drying is not advisable as it can not only damage your clothing, but also the machine as well.
Chainsaw trousers are necessary PPE because it’s the legs that sustain the majority of injuries in a chainsaw accident. If you’re not wearing sturdy chainsaw trousers and the chainsaw breaches your pants, you can kiss goodbye to your limbs. It’s a 6-layered chainsaw trouser that is lightweight in comparison to many other chainsaw trousers in the market.
The safety mitt also protects the operator’s left hand in the same way as chainsaw safety gloves. Chainsaw boots are based on ordinary steel-toe boots, but have layers of chainsaw protective fabric on the exposed front surfaces. In the EU, chainsaw trousers, boots and gloves must carry a special chainsaw logo.
how long do chainsaw trousers last Related Question:
Can chainsaw pants be washed?
#2 How should I wash them? You can try to do it by hand if you want but a gentle, warm machine wash (max 100⁰F/40⁰C) should do the job! Do not use bleach on your trousers it will obviously affect your overall look but it might also remove some of the important finishes that are built into the fabrics.
Do chainsaw trousers work?
Chainsaw trousers are packed full of super-strong ballistic fibres known as “Aramid” fibres. When the chainsaw meets the outer layer, these fibres are drawn out of the trousers and into the engine of the chainsaw, causing a jam. The chainsaw will then stop and prevent any more damage being done to the user.
Can you tumble dry chainsaw trousers?
The most important thing to remember with chainsaw trousers is DO NOT TUMBLE DRY THEM. Make sure to air dry them on the washing line, in the airing cupboard or on the airer in front of the radiator or wood burner. If you tumble dry them it can damage the trousers as all the fibres and elastic can shrivel up.
Can you machine wash chainsaw chaps?
Do not machine wash or machine dry chain saw chaps. Hose and brush off chaps to remove dirt and large contaminants.
Can you wash Stihl chainsaw chaps?
Machine wash in warm water only. Use mild detergent. Tumble dry.
Do you wear anything under chainsaw trousers?
Chainsaw safety boots will need to provide good grip and a protective guarding at the front vamp and instep. They should also be waterproof and breathable for comfort.
Can PPE be washed in washing machine?
/ Protective Gloves & Glasses: When washing contaminated PPE and handling the wash chemicals, it’s important to wear protective gloves and glasses to protect yourself from any splashing. / Wash Cycles: At a minimum, PPE should go through one complete cycle with at least two rinses.
How do you clean a clogger?
This is why Clogger wash instructions specify a gentle machine wash. For instance, “permanent press” and why we say “Do not tumble dry”. Clogger chainsaw protective fabric is engineered to withstand repeated, regular washing without damage when using gentle agitation.
How long tumble dry trousers?
An average wash load should take between 30-45 minutes to dry in a good tumble dryer, with an average time of 40 minutes for most clothing items. However, items like jeans and towels will take longer to dry than other items, so may need to be kept in longer.
How are chainsaw chaps supposed to fit?
Chain saw operators need to wear chaps long enough to reach at least 2 inches below the boot tops. The waist and leg straps should be adjusted for a snug fit that will keep the chaps positioned correctly on the legs.
When should I retire my chainsaw?
That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.
What does class 1 chainsaw trousers mean?
Class 1 is the lowest allowable safety protection provided by chainsaw boots. These boots have a steel cap covering the toes to ensure the running blade doesn’t penetrate the shoe and harm the feet. Class 1 boots are designed to withstand 20m/s speed chainsaw blades.
Can a chainsaw cut through clothes?
A chainsaw is not the best possible tool to use against clothed humans. The blade is designed to cut hard, fibrous materials such as wood, and not soft, flexible and strong substances such as flesh and cloth.
What chainsaw trousers do I need?
Chainsaw protective trousers have to comply with the EN381-5 standards. It is essential to wear trousers that are made of a sturdy and durable material that has a certain amount of stretch. This material needs to be resistant to chainsaw cuts as well as comfortable.
Do chainsaw chaps ruin the chainsaw?
Chainsaw chaps do work. Whenever you contact the chainsaw while wearing the chaps, it will cut through the material of the outer layer. However, the damage will not get to you since the inner layers have been designed to be loose enough to be drawn out by the chainsaw and wrapped around the chainsaw’s drive sprocket.