Bandsaw blades don’t last forever, but they are durable and can take on quite the workload. I wanted to learn more about how long these blades should last and how to extend the life of your blade. Keep reading below to discover more about how long your bandsaw blade should last. How long a bandsaw lasts depends mainly on the materials the band saw is used to cut, the condition of the blade and the bandsaw machine itself, how the materials are fed to the saw, frequency of usage, and maintenance.
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well. Others think that if you want your new blade to last as long as it can, investing in a higher-quality blade will be worth it in the long run. How you use your blade does make a difference in how long the blade should last.
The blade is the standard 1″ silicon steel blade that shipped with my Laguna and I am trying to gage whether this is an appropriate life for a blade. 12-02-2008, 2:10 PM #2 Stock blades won’t last long. 12-03-2008, 7:39 AM #8 Timberwolf My Timberwolf blades last for years – if propertly tensioned before use and de-tensioned after use, if the feed rate is slow, if the blades are cleaned frequently, and cut only wood that has been inspected for metal objects such as nails or screws.
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well. Return your sawmill blades to one of our Wood-Mizer ReSharp locations and we won’t just sharpen your blades – we will return them to original manufacturing standards for as little as $8.25 per sawmill blade. How to tell when your bandsaw blade is nearing the end of its life.
You either have to have a dedicated band saw and blade for each type of cutting, change the band saw blades according to the type of cutting your project requires, or choose one band saw blade that best fits the mix of work currently going through your shop. In fabrication shops, most band saw blade failures occur because of these repeated shocks, not excessive wear. The primary cause of band saw blade failure in fabrication shops is tooth stripping.
how long do metal bandsaw blades last Related Question:
How long does a metal cutting blade last?
No matter how much care you give to your blade, a time eventually comes when it needs to be changed. On average, a typical cold saw blade should last at least six months. Damaged teeth.
How long do bandsaw blades last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
How many times can you sharpen a bandsaw blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
Can a bandsaw blade be sharpened?
If you’re looking to sharpen your band saw blade, you have two options: manually sharpen the blade yourself or use a mechanical sharpening machine.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
How long should a saw blade last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
Is it worth it to sharpen bandsaw blades?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
What do you do with old bandsaw blades?
There is life for those old, broken, and dull bandsaw blades. Just cut the old blade into sections about 12″ long. Stack the pieces together, alternating the teeth so that they don’t touch their neighbors. Use either same tape, or just braze the ends together,.
How long should a sawmill blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How often do you have to change blade on a sawmill?
When operating a band sawmill, a general rule is to replace the bandsaw blade with a sharpened one on average every 1,5 hours of cutting. In the case of cutting dirty wood, this time will be shorter.
Can you sharpen metal bandsaw blades?
Sharpening Options There are two basic ways to sharpen bandsaw blades, mechanically, with the use of a machine, or machines designed to sharpen and reset bands, and manually, with the use of hand tools, or hand power tools.
How many teeth per inch should a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
Why do my sawmill blades keep breaking?
It is essential that the rollers are in good condition without any traces of wear, such as deformation (cone shape), damaged bearings, worn-out roller flange. Worn rollers cause the sawblade vibration and unstable work in the wood, which will lead eventually to a breakage. If the rollers are worn out, replace them.
How long do reciprocating saw blades last?
The blades on a reciprocating saw are made of tungsten carbide and are designed to last for a long time. The average blade life for a reciprocating saw blade is about 10,000 hours. Blades will wear down over time, and will need to be replaced.
How can I speed up my bandsaw?
Answer: Some models of bandsaws do provide the ability to alter the speed of the blade (usually expressed as FPM – feet per minute). The change of speed is usually accomplished by moving a drive belt to a secondary location on the pulley(s) of the drive pulley and motor pulley.