Measure the distance between any 3 consecutive rivets that hold the chain assembly together. The rivets are noticeable between the drive links and the cutters – the cutting teeth that lie on top of the chain. The pitch, together with the number of drive links, describes the chain’s length when seeking replacement chains.
“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
I’ll show you the easiest methods for how to measure a chainsaw bar and how to measure a chainsaw chain length. The second way for how to measure a chainsaw bar length is called the “True” length of the blade. With the information you learned here, you no longer have to wonder how do you measure a chainsaw bar or chain because you now know how to do it.
The following explains how you measure a chainsaw chain and also includes some important tips for chain care. You may need to remove the chain to do this, but might be able to loosen the chain and then spin it above the bar to count. If you have ever wondered about what those numbers on a chainsaw bar meant, or was confused as to how you might match your existing chain to one in a store – worry no more.
how to start my chainsaw Related Question:
Why is it so hard to start a chainsaw?
The chainsaw’s engine is flooded with fuel. A fuel issue is one of the most common reasons why a chainsaw won’t start. If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel.
Do you start a chainsaw with the brake on or off?
Check the Chain Brake When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
What is the easiest starting chainsaw?
The best gas-powered model, the ECHO 18 in. Gas 2-Stroke Cycle Chainsaw, is easy to start and has impressive cutting power.
What does a choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
How does Stihl easy start?
Compared with conventional starters, the STIHL Easy2Start™ not only requires less effort, but also allows the starter rope to be pulled approximately two-thirds slower. The even pull on the starter rope overcomes the engine’s compression to minimize the strength and effort required to start.
Why does my chainsaw not stay running?
Your chainsaw’s engine needs the right supply of air to run properly. A clogged air filter can be the reason why your chainsaw won’t start or stay running. Find your chainsaw’s air filter and remove it. If it’s clogged or too dirty, wash it or replace it.
How long does a spark plug last in a chainsaw?
A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.