Circular saws turn corners about as well as a freight train, and standard models will cut only about 2 1/2 inches deep. There are ways around the shallow cut—for example, you can flip over a 4×4 and cut from two sides—but the curve limitation has no work-arounds.
Let’s just say that if you have a circular saw, you can quickly make 9 different cuts with it-cuts that you could also make with a table saw. It’s hard to say what the “Best” circular saw is because it depends on how you’ll use the saw, what you’ll be cutting, and your general preferences. Both the circular saw and the jigsaw are two of my favorite power tools and I use them interchangeably to cut wood, but the biggest difference between a circular saw and a jigsaw are the blades, type of cut, the thickness of the material that can be cut, and the type of materials that can be cut.
If you don’t have a table saw handy, and the rip cut doesn’t have to be precise, then a circular saw works fine. Then align the saw with your mark and let gravity help pull the saw through the cut. Making long narrow rip cuts with a circular saw is easy if you use your index finger as a guide.
The circular saw is a solid all-around power tool for making straight cuts in almost anything you can buy at the home center. The circular saw is also a portable tool, meaning you take the tool to the work, rather than resting the wood on the saw to make a cut. If you want to make straight rip cuts, you can make a simple circular saw guide to help keep the saw on track.
how shallow can a circular saw cut Related Question:
What is the minimum cutting depth of a circular saw?
Circular Saws Parts And Features. These have indicators on them, that tell you what depth your cut will be. These can range from 0″ and go as deep as 2.75″ but usually the maximum depth is around 2.5″ or so for most models.
How thin can you cut with circular saw?
The circular saw can cut any depth from 0 to about 2 3/8″. This is awesome. But, to get the best quality cut and reduce the possibility of kickback, you’ll want to set the proper cut depth for your material. The blade should only project about 1/4 -1/2″ below the bottom of the material.
How deep can a 4 1/2 inch circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees. The saw also features a depth of cut adjustment lever and a 1-1/4″ vacuum adapter.
Can you adjust the depth of cut on a circular saw?
A circular saw has a depth adjustment lever or knob that releases or loosens to allow for adjustment of the saw’s bottom plate, often called the “shoe.” First unplug your saw, then disengage this lever so that you can freely adjust the cutting depth by raising or lowering the bottom plate.
How deep can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
How deep can a 8 inch circular saw cut?
Circular saw sizing is based on the blade diameter. Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches. Compact saws can use anywhere from 3 3/8-inch blades up to 6 1/2-inch blades.
How deep can a 10 inch circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
How deep can a 6.5 inch circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
Will a 7 1 4 circular saw cut a 4×4?
Standard circular saws with 7 ¼” blades can only cut 2 ½” deep, so making the cut in a single pass isn’t possible. That means you’ll need to make multiple passes to cut clean through the 4×4, and this can result in a poor finish unless you take steps to ensure your cuts line up perfectly with each other.
Can a 5.5 inch circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
What is the closest you should put your fingers to the blade while it is running?
Do not put your fingers closer than two inches from the blade. 3. Do not place your hands directly in line with the blade while cutting stock. 4.
Why does circular saw kickback at end of cut?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback.
Can a 6 1 2 circular saw cut a 4×4?
Like miter saws that measure less than 12 inches, a circular saw’s 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you’ll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
