how to adjust belt sander Related Question:
How tight should a belt sander be?
In basic terms, the amount of tension on the coated abrasive belt should be just enough to keep the belt from slipping on the drive wheel, and to keep the belt from tracking off the wood working machine.
How do I get a smooth finish with a belt sander?
Belt sanders excel at the rapid removal of wood, making them the best handheld power tool for leveling and smoothing rough boards. Start at an angle to the grain for aggressive leveling, then finish with the grain. 80-grit is good for starting, then switch to 120-grit.
How do you tilt a belt sander?
To Tilt the Belt Sander Table: Turn off the sander. Unlock the locking handle on the side of the table by rotating it counterclockwise. Note that the stop handle is spring loaded to allow you to loosen the handle enough to move the table.
Why is my belt sander leaving lines?
If the inside of your sander has a lot of dust, there is likely an issue with the machine and it often shows in the materials run through the machine. Excessive dust buildup can result in burn marks or lines on the workpiece. Dust buildup can also cause tracking issues and prematurely wear out the belt.