0 30 0 20 0 00 10 Blade Selection Free Hand Cuts One of the most outstanding features of a band saw is the ease with which it allows you to make curved cuts. The blade supplied with the band saw is designed for all-purpose use. Wear eye, ear & breathing protection Wear hearing protection Wear breathing protection Wear eye protection CLEANING Regulatory Compliance Mark Warning Pull the power plug before beginning any repair or maintenance work Warning! Risk of injury! Do not reach into the running saw blade eep all safety devices, air vents and the motor housing free of K dirt and dust as much as possible.
We will exchange or refund within the first 30 days if a manufacturers fault is found with this product. After the first year any warranty claims should be resolved with the manufacturer directly. For any technical enquiries relating to this product it is best to call the manufacturer, Ozito, direct on 0151 649 1500.
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves. During regular cutting on a well set up bandsaw the blade will move or bow backwards a bit as you press the workpiece into it. The side guides will assist in keeping the blade cutting straight, but they are not an iron lock on the blade forcing it to cut straight.
how to assemble ozito bandsaw Related Question:
Does a table saw need a riving knife?
As of 2009, Underwriters Laboratories (UL) requires that all new table saw designs include a riving knife.
Which way should the teeth face on a bandsaw?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
Where are Metabo saws made?
The saw is made in China. In summary, the Metabo is definitely worth a strong consideration. It is a nice saw. Because of the Metabo’s deep table, basic physics tells me that it will rip boards and sheet material easier and more accurately than any of the other saws mentioned.
Why are knives not riving?
When you push a workpiece through the saw blade, the riving knife is designed to keep the two cut sections of the board from closing up, thus pinching the saw blade and causing dangerous kickback. Rip cuts are especially prone to kickbacks, and it is here that the riving knife is most important.
What is the purpose of the blade guard on the table saw?
Its purpose is to keep the kerf of the cut open or “split” to prevent the workpiece from pinching the blade, or contacting the rear, rising teeth of the blade and thereby causing the blade to throw the workpiece back at the operator. This is known as “kicking back” the workpiece or simply a “kickback”.
What materials can a bandsaw cut?
Most bandsaws have two wheels rotating in the same plane, one of which is powered. The blade itself can come in a variety of sizes and tooth pitch (teeth per inch, or TPI) which enables the machine to be highly versatile and able to cut a wide variety of materials including wood, metal and plastic.
How far should the safety guard be above the stock?
Keep guards in place at all times. The blade guard should be from 1/8 to ¼ inch above stock. Keep hands away from blade and do not open upper or lower bandsaw doors while blade is in motion.