One Drawer Down, Three To Go. If your band saw box has more than one drawer, go ahead and cut out the rest of them now. The next step is to create the cavities that make the drawers, drawers. Be sure to put the drawers into their respective places – especially with oddly-shaped drawers – to make sure you get the pulls level.
I used cut 1x4s and glued the pieces together to make the initial cube shape that I would cut down with my bandsaw for this project. Now you can start cutting away the excess, the nice part about a bandsaw box is that you have room to make mistakes because everything is going to get cleaned up when you sand it! Now you just want to cut the back of the box off as straight as you can.
Cut and assemble a band saw box Band saw box cutting order. From the band saw blade and cut both sides off the board. Remove the fence, trace the contour of the inside of the box on the center piece and saw it out freehand.
how to build a band saw box Related Question:
How thick should a bandsaw box be?
Bandsaw Box Project. Use a good size chunk of wood for the box. I’m using a 3” x 4” x 6” piece of spalted tamarind. I wouldn’t use anything less than 2” thick, 3” is better.
What is a band saw box and how is it constructed?
Band saw boxes are boxes made out of wood using only a bandsaw for cutting them out. The wood may be a solid block, a laminated block or a log from the woodpile. Whereas most boxes have straight sides and square corners, band saw boxes have virtually no restrictions as to shape.
What materials can a bandsaw cut?
Most bandsaws have two wheels rotating in the same plane, one of which is powered. The blade itself can come in a variety of sizes and tooth pitch (teeth per inch, or TPI) which enables the machine to be highly versatile and able to cut a wide variety of materials including wood, metal and plastic.