Hello everyone, today I’m sharing how to build a circle cutting jig for your bandsaw. My bandsaw circle jig is largely inspired by George Vondriska’s bandsaw circle cutting jig. Using more scrap oak, I ripped a piece of oak that matched the width of my bandsaw’s miter slot and attached it to the base of the circle cutting jig.
An editor’s favorite, we used this jig in the WOOD magazine shop to resaw spalted maple into beautiful jewelry box stock. Get started harvesting logs right in your own backyard or local forest, using Brian Hahn’s favorite jig and technique for converting firewood into valuable stock. Download the Resawing Bandsaw Jig and Technique article, including step-by-step instructions, detailed illustrations, and a complete materials list.
When selecting an aerosol can to finish your woodworking project, pay special attention to the nozzle on the can. George Vondriska provides tips on how to formulate the board foot measure of hardwood so that you can better assess how much wood you’ll need for your woodworking project and better communicate with the salesman when you go to purchase your wood. George Vondriska provides tips on how to use a backyard saw mill to cut lumber from logs for your woodworking projects.
How to cut perfect circles with a band saw Photo 1: Attach the runner. Cutting perfect circles is easy with a band saw-as long as you take a half hour to build yourself a cutting jig. The auxiliary fence not only stops the jig at the right spot for turning circles but also keeps the jig from tipping up from the band saw table.
how to build a bandsaw jig Related Question:
Can you cross cut with a bandsaw?
A cross cut sled for band saw is a very useful addition to any shop and will make it a lot easier to get straight cuts on the band saw. This particular jig features a very useful clamping system which makes it easy to hold the wood in place, and make mitered cuts too.
What type of bandsaw blade is best for Resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What router bit to use for cutting circles?
We recommend a solid-carbide up-cut spiral router bit. For the Model 300 Circle Guide, use a 1/2″-dia. router bit.
How do you cut a circle in wood with a Dremel?
How to use? Insert the included Multipurpose Cutting Bit (561) and screw on the Line & Circle Cutter attachment onto your Dremel Multi-Tool. Set your diameter using the markings on the attachment drill a hole into the center of the circle you want to cut out.
How do you cut a 45 degree angle with a bandsaw?
The trick is simple. Stick the magnet to your blade and make sure it’s following the natural angle of the cut, then adjust the backrest on the saw to line up with the 45 degree side.