A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
Next you need to figure out the width of the blade that will work for the type of cut you plan to make. Once you determine length, width and teeth per inch, you need to figure out what type of tooth configuration is right for the cut type and material you are cutting. There are three main types of bandsaw blade teeth: regular, hook and skip.
FREE STANDARD SHIPPINGOn Orders Over $100 Exclusions apply, see footer below for details. 12.95 FLAT RATE SHIPPINGOn Orders Under $100 Exclusions apply, see footer below for details. Classic®Bi-Metal Band Saw Blades The ultimate multi-purpose bandsaw blade.
how to buy bandsaw blades Related Question:
How do I know what band saw blade to buy?
Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less. Larger saws usually can handle thicker and wider blades with no issues.
What size blade does a 14 inch bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How is bandsaw blade width measured?
Blade width is measured from the tips of the teeth to the back edge of the blade as shown above. The instructions for the particular machine being used should be followed when selecting blade width. The number of teeth per inch (TPI) is important in obtaining the finish desired and the proper feed rate.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What are the three main types of bandsaw blades?
There are three basic tooth styles in bandsaw blades: regular, skip and hook. Regular tooth blades have proportionally spaced teeth and are ideally suited for general-purpose cutting and contour sawing. Regular blades are ideal for cutting thin materials with a fine finish.
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What does a 14 inch bandsaw mean?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What is the most common bandsaw blade length?
Try a blade of 114″ or 115″ length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2″ difference between the shortest and longest blades that the saw can use.
What size blade does a Craftsman 14 bandsaw?
Precise and Powerful Cutting Perfect for cutting intricate details and smooth curves that other saws can’t, this saw features a long 100″ blade with 2 speeds to deliver a perfect cut every time.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What is 14 TPI for cutting?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
What is resawing on a bandsaw?
Bandsaw Resawing from the beginning: resawing is cutting a sawn plank of wood into thinner planks on a bandsaw. Thus the cut runs through the plank’s width, which distinguishes bandsaw resawing from ordinary bandsaw rip cuts where the blade runs through the stock’s thickness.