Look at the tension adjustment rod, if it still has it. Look for slippage in the tension rod at the point that a blade would be tensioned properly. The square nut in the tension assembly is of a harder material than the tension rod so the rod is the sacrificial component.
I you do, then I would think you would be able to determine if it is a saw worth your time and money,. I remember years ago, I bought a used band saw from a gun shop, I saw it and was or had been looking at it in a catalog, I asked if I could look at it, and they said yes, then asked if they wanted to sell it, they said yes, so I looked it over and started it up made a noise, I started to adjust it, tracked the blade and adjusted the guides and the roller guide and then adjusted the lower set, had it up and humming and bout it for about half of the catalogs price, after I got it adjusted, I think may be they were starting to have second thoughts. Check it out adjust it get it running true and see if there are vibrations and if there is any thing that one can see that should not be.
“As far as I’m concerned, they’re good saws. My only complaint is that the 6” cutting height is a bit too small, but I get by until I can afford something larger. You should get an idea if the saw actually does work. 50 for one of these saws that basically works is about right if you have to replace the tires, the belt, and the guide blocks.
“There are many flavors of this band saw depending on who owned Delta at the time the machine was made, and machinery collectors make fine distinctions about which era was the best. But for users, I think the decision is simple: If it’s a Delta 14” band saw that was made in the United States, it’s worth owning. I bought my 1980-vintage Rockwell Delta saw for $275. Most accessories fit the Delta band saw – heck, most accessories were designed with this saw in mind. “I put in an aftermarket zero-clearance throat insert, a $5 upgrade. This prevents small offcuts from getting wedged between the blade and throat insert. The main tension spring on my saw wore out. So I replaced it with an aftermarket spring. And I replaced the original belt with one of the red Power-Twist V-belts. Those do make a difference on machinery. In fact, I run this saw with an old 1/4-horsepower U.S.-made motor from the 1950s and the saw has never stalled or felt underpowered, even in resawing 6”-thick material.
how to buy used band saw Related Question:
How much does a good bandsaw cost?
If you change the stock blade for a better quality one, you can expect to make some reasonable cuts, and that is quite something for the low price of just about $125. It even comes with a miter gauge included, which often isn’t even the case on $2000 bandsaws.
What size band saw do I need for woodworking?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How do I choose a band saw blade?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
Is a portable band saw worth it?
What to Consider When Choosing Portable Band Saws. The portable band saw is one of the few tools that, when used with the right blade, is equally effective regardless of material. It can cut straight lines or curves, so it can be used for joints, precision cuts, or decorative work.
Are band saws useful?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What is the best size bandsaw?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
What materials can a bandsaw cut?
Most bandsaws have two wheels rotating in the same plane, one of which is powered. The blade itself can come in a variety of sizes and tooth pitch (teeth per inch, or TPI) which enables the machine to be highly versatile and able to cut a wide variety of materials including wood, metal and plastic.
What is the difference between a band saw and a jigsaw?
Bandsaws are used almost exclusively for re-sawing projects. Jigsaws are, by definition, hand power tools that cut with a reciprocating motion and are generally used to make various curved cuts on thinner material.
What size blade does a 14 inch bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel.
Where is Wen made?
In case you are wondering where WEN tools are made, they are made in China, although most agree that they are some of the better tools to come out of Chinese factories. When it comes to Ryobi, the products are seen as being about on par with WEN products.
Where is Rikon band saw made?
RIKON’s ISO9001 certified factory in located in Qingdao, China. In addition to being officially IS09001 certified, they utilize the systems of 6-Sigma and 5S Management. This assures consistent, top quality products, allowing us to stand behind our products with a 5-year warranty.