When you’re planning on felling a tree, you can estimate where a tree will fall by using the “Ax handle trick.” This is how to fell a tree in the direction you want: hold an ax handle at arm’s length, close one eye, and back away from or move toward the tree until the top of the ax is even with the treetop and the bottom is even with the base. Wedges will keep the saw from getting pinched in the cut if the tree leans back. The instant the tree begins leaning, pull the saw free, set the chain brake and walk away along one of your escape routes, keeping an eye on the tree so you can react if it doesn’t fall the way you planned.
Here at HealthyHandyman, we’ve taken it upon ourselves to show you how to cut down a tree with a chainsaw – the right and safe way! Even with the best planning, your tree may get caught on another tree on its way down. If the tree is twenty inches wide, you would cut the open-faced notch five or six inches deep, and the back cut 12 or 13-inches deep, leaving a 2-inch hinge in place.
In this post, I’ll teach you everything you need to know about how to cut down a tree with a chainsaw. Cutting down a tree may seem like an easy task when the tree is small, but once you start taking down taller pines and oaks, it gets a bit complicated. Using your chainsaw to try and cut a lodged tree or the tree that it is stuck in can pose a lot of danger.
how to chainsaw cut a tree Related Question:
How long does it take to cut down a tree with a chainsaw?
Some trees can be taken down in as little as 15 minutes, while others can take a few hours. Usually, the more cramped or crowded the location of the tree, the longer it will take to remove. Your professional removal team will be able to give you a ballpark time estimate once they get a look at the removal site.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What side of the tree do you make the first cut?
Start Cutting Branches at the Trunk Work from the left side of the trunk (as you face toward the top of the tree). This allows the safest and most efficient use of the chain saw because you can rest the side or bottom of the saw on the trunk and slice off the branches with a pivoting motion.
Which way will a tree fall in a storm?
A tree will most likely fall in the direction of the lean.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
What kind of axe do I need to cut down a tree?
A Felling axe is specifically designed for cutting down trees. They have broad, razor-sharp cutting edges that cut deep into the fibers of the wood with each stroke. Forged with a curved bit, ideal for cutting into fresh wood and fitted with a long handle to provide ample power to the swing.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
What size chainsaw do I need to cut down a large tree?
The usual guideline is to choose a chainsaw with a bar that is two inches longer than the diameter of what you need to cut. For example, if you need to cut a tree that is 10” across, you will need a chainsaw of 12”.
What size tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
What is the difference between topping and pollarding?
The major difference between the two words: Whereas the former is done with design in mind, the latter is done out of expediency. More thought and planning goes into pollarding, which is considered an art form, much like topiary. Topping means cutting older trees down almost to the top of the trunk.
How much of a tree can you cut without killing it?
As a general rule, don’t prune off more than 15% of the foliage. If you must make space for other plants, it is a better idea to remove a tree completely than to risk over-pruning it.
How tall of a tree can you cut down?
While many people automatically call an arborist to take down a tall tree, you can cut down your own tall tree with the correct precautions. Call a professional if the tree you wish to cut down has a trunk more than about 16 inches in diameter or if buildings or other obstacles may be hit when it falls.
How much wind does it take to knock down a tree?
Almost all tree trunks break, regardless of their size or species. Critical wind speeds, in which no tree can withstand punishment for any continuous length of time, is around 90 mph. The breaking phenomenon of critical wind speed is mostly independent of the tree’s diameter, height or elastic properties.
How much wind is needed to uproot a tree?
– at 47 to 54 mph, there will be light structural damage. – at 55 to 63 mph, entire trees can be uprooted and considerable structural damage can occur. – above 64 mph, expect widespread structural damage.
Why should we not cut trees?
Ans. We should not cut trees because trees give us oxygen to breathe. Trees are also useful in many other things like, they give us fruits, vegetables, herbs and wood, etc.