To find out more about how to choose the best size chainsaw for cutting firewood, check out my other guide with reviews of the best chainsaw for cutting firewood. The complete steps for how to cut firewood with a chainsaw. If you don’t have the right size chainsaw for this task, take a look at the best chainsaw for cutting firewood to find the right tool for your needs.
If the trunk is on a fairly firm surface, you can cut the trunk to length where it is. Making thin trunks, branches and split pieces into firewood. Once you have cut your own logs, they will need to dry for around two years before they can be used on the fire.
Before you jump right in here are 7 essential firewood cutting tips for beginners. Have the proper firewood cutting tools Chainsaw If you are just beginning your search for buying a chainsaw then you already know there are tons of options out there on the market. Don’t make the mistake of cutting and stacking all of your firewood only to find out your cut it too long.
Some more tips about cutting firewood with a chainsaw. Many chainsaw owners will eventually use their power tools to cut logs for firewood. Cutting firewood with a chainsaw seems easy enough, but it can be quite challenging.
how to chainsaw firewood Related Question:
Is it easier to chainsaw wet or dry wood?
No, it is not bad to cut the wet wood with your chainsaw. Dewdrops, raindrops, or the snow on the wood will not cause any harm to your chainsaw. It is, in fact, much easier to cut through the wet wood than dry wood because the extra moisture on the wood will act as a natural lubricant.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Is it OK to cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Why does my chainsaw dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Should I run my chainsaw dry?
Should I run my chainsaw dry? Never run your chainsaw dry, instead use a quality gas stabilizer. A stabilizer will keep fuel fresh and protect a chainsaw fuel system from damage caused by stale gas.
Is dry wood harder to cut?
Dry Wood Is Typically Easier to Split Regardless of the tree species from which it was harvested, dry wood contains less moisture, so there’s less resistance when cutting and splitting it. An ax or log splitter blade will easily cut through dry wood thanks to its low moisture content.
Why does dirt dull a chainsaw?
Don’t Cut Into Dirt All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Plus, dirt wears the sprocket at the bar tip.
How do I stop my chainsaw from pinching?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
How long should chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What will a 12 inch chainsaw cut?
Felling small trees – 12” to 14” Cutting down small trees in a yard or garden will require a chainsaw of about 12″ to 14” depending on the thickness of the tree trunk.