First cut should cut should be made from the underside towards the top about 1/3 of the way through the log. Once you had assessed the situation, begin to cut the limbs supporting the tree, cut from under these limbs to avoid the chainsaw getting pinched or stuck. Make an initial cut upwards, about 1/3 of the way through the branch, a short distance from the trunk of the tree so you have room for the final cut which will be close to the trunk.
The V shaped cradle works well for ‘noodling’ as well, which it sounds like you’re doing. I’m sure it’s been done time and time again, but I was looking at the rack we used to stack tobacco sticks in to bundle up, and realized it was ideal for holding logs steady to do just that.
A log holder attaches to the top of your electric chainsaw and holds logs in place so they don’t move while you’re cutting them. If you’re just beginning to cut tree logs with a chainsaw or chainsaw mill, then it might take some practice in order to develop the right techniques for holding onto logs securely. It is important to learn how to hold logs while cutting with a chainsaw for safety reasons.
Cutting logs with a chainsaw can seem daunting, especially because it’s one of the first skills learned by chainsaw users. In this guide, we’ll be covering the following 8 steps, which will show you the basics for how to cut logs with a chainsaw. Basically what can happen, is if you hit that part of the chainsaw against a piece of wood, it catches the chain and throws the whole chainsaw back towards the user.
how to chainsaw small logs Related Question:
How do you saw a log on the ground?
Cutting a Log on the Ground Technique Start cutting from the top of the log, applying light pressure to the chainsaw. The chainsaw should do the work, and the teeth should pull the chain bar into the wood. Don’t let the guide bar nose or chain touch the ground or other objects.
Can you cut wet logs with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Can you cut sideways with a chainsaw?
While a properly working chain saw helps you cut hours off your work time when felling trees or cutting logs for firewood, it can also be a dangerous tool when things go wrong. When a chain saw cuts sideways, it’s a clear indication that things aren’t as they should be.
How do I stop my chainsaw from pinching?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
Why do you debark logs?
Debarking helps speed the drying process. The bark can provide a hiding place for insects. After a log has been cut or a branch has been severed, insects have new openings that allow them to slip beneath the bark more easily. There, they can multiply and thrive, and they don’t need much space.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Why does my chainsaw dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How often should you change your chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
Can you cut logs with a miter saw?
To cut your wood slices, we strongly recommend you have either a miter saw or band saw. These are the best saw options to use when cutting log slices, as they can make more precise cuts with the uneven nature of a log. They can also cut thicker pieces of wood than other types of saws.
Do I need to split small logs?
Splitting small logs is time consuming and also at big risk of injuries. I have seen people stacking smaller logs into a tire, which seems to work OK. I have used a rope or chain with an attached bungee cord, that I wrap around a large log, or several smaller logs. That makes splitting both efficient and a lot safer.
What’s better for splitting wood axe or maul?
For smaller pieces of wood, or splitting around the wood’s edges, a splitting axe is the better choice. It’s lighter, easier to swing and performs similarly to a splitting maul. The wood-cutting pros at Husqvarna recommend you have both, as together they form an excellent one-two punch for your wood splitting needs.
Can you split wood with a regular axe?
Splitting axe or maul You’re not going to chop down a tree with a maul. But because of its wide cheeks and edge which is duller than that of a felling axe (by design), you’ll be able to split even the largest rounds of wood. Regular axes – with flat, thin edges and cheeks – cut into the wood and get stuck there.
What length do you cut logs for lumber?
Find yourself a nice and straight stick, preferably green and hard like oak or ash. Use a tape measure and cut the stick to either 4 feet or 6 feet exactly. I like to use 4-foot-long sticks because most log lengths are divisible by 4 feet. Mark the stick by cutting a groove in it at 2-foot increments.
How do you mark a tree for cutting?
Always use stump marks for any tree marked for cutting, as a leave tree, or as a boundary tree. Ensure that the mark is at or near the ground line, but on the tree and not the ground. Make the stump mark large enough to be conspicuous if scraped or chipped off.