Unplug the Dewalt grinder power cord from the outlet. Orient the grinder so that the wheel spins from the body of the blade toward the edge. Finally, with the grinder off, rest the grinding wheel against the blade and adjust the angle of the grinder to match the blade’s bevel.
We show you several ways of how to change an angle grinder wheel. Slip your new angle grinder wheel on, and reverse the process. My favorite way to replace an angle grinder wheel involves switching out the stock flange with a Hilti Kwik-Lock flange.
Remove the Angle Grinder DiscRemoving the Angle Grinder disc with factory keysYour new grinder comes with two separate keys that look like flat wrenches. Removing the Angle Grinder disc without keysUsing the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. The main thing is that when changing a disc on a grinder, do not violate safety precautions and remove the disc with the angle grinder turned off.
how to change an angle grinder disc Related Question:
What tools use to remove the angle grinder disc?
A pin wrench is the required tool that comes with an angle grinder and is used to remove a disc. This wrench resembles a pitchfork and has two knobs on the end that you insert into the drive bolt to loosen the nut holes that attach to the disc.
Can you change the blade on an angle grinder?
The blade of your angle grinder is held in place by a locking nut. Changing the blade requires this nut to be loosened and removed. This is usually done using a special two-pronged wrench. A wrench that fits the size and shape of your angle grinder’s locking nut should have been in the box when you purchased it.
How do you remove an angle grinder blade?
Use your screwdriver to remove the blade guard before you remove the blade. This will make it easier to get the blade off. Loosen the screw that holds the blade guard in place, or push the release latch on the blade guard to remove it.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
Which way should an angle grinder spin?
Every right-angle grinder is marked with a directional arrow on the head of the grinder that indicates the direction the wheel is rotating when in use. For optimal performance, it’s important to orient the cutting wheel so it rotates into and pulls itself into the workpiece rather than rotating away from the workpiece.
What is cutting disk?
Often cutting discs, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive that is formed into a thin, rigid disc with fiber webbing running through it for strength.
Are angle grinder discs universal?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
What is the thread on an angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
